Akashic Guitar effects circuit lookup
DRIVENATUREVOLUME

1590B · 3 knobs

Tagboard Effects

Mad Professor BlueberryVerified

Based on the Mad Professor Blueberry Bass Overdrive· 4 other boards clone it

Category
Overdrive
Controls
Drive · Nature · Volume
Build
Vero· 21×19· 20 cuts, 7 links
Layout
Verified · Tagboard Effects marks it as built and working
Tags
Bass, BJF/MP, Overdrive

From the post

Requested by a few people now and I do want to keep the bassists happy too. In tomorrows blog I'm going to show you how to make pizza boxes, especially for drummers. Just kidding! :o)

Although the hand built BJF and Mad Professor effects can hurt your wallet, with the new PCB range out they've made them a lot more accessible to the masses. And as these are great sounding effects and certainly more than Tubescreamers with different input caps, this is another builder that we want to keep making pedals. Plus Bjorn's a good guy and plays AC/DC and Iron Maiden so I like him! :o)

A few notes: This is small enough to fit in a 1590B with a bit of careful measuring. Some people have said this is a bass Honey Bee, but doing the layout I found it more similar to the Model H but with diode instead of JFET clipping. If anyone has trouble with biasing, consider swapping the 30K and 5K6 resistors for appropriate trimmers and aim for around 5 to 5.5V on the JFET drains.

Info about the original:

BJF design dynamic bass overdrive.

Mad Professor BlueBerry Bass Overdrive (BBBOD) is a high quality dynamic overdrive pedal for electric bass.

It was designed to get light to medium overdrive, reminiscent of vintage tube bass amplifiers.

With the Drive control, you can get natural dynamically controlled overdrive like on those old tube bass amplifiers, or more compressed thick distortion.

At lower drive settings the BBBOD distorts more the harder you strike the strings, and there is no definite clipping point, but rather different shades of distortion as the amplitude changes. Higher settings will give more compressed sounds.

With the clever Nature adjustment one can adjust the tone, and also control what register distorts. From really big and fat with low register distortion to cutting upper midrage solo bass tone.

There is enough volume to use the pedal also as a booster.

While mainly designed for bass guitar, the BBBO can also be used with other instruments for low, dynamically controlled distortion.

Controls:

VOLUME : controls output

DRIVE: sets the amount of distortion and sustain, as well as the type of distortion.

Lower settings give dynamically controlled overdrive, the unit distorts more the harder you strike the strings and there is no definite clipping point, but rather different shades of distortion as the amplitude changes.

Higher settings will give more compressed sounds.

A good starting point with most basses is fully CCW, turn the knob until you find the overdrive level that suits your playing.

Lower settings are good for old school tube amplifier tone, while higher settings gives denser distortion.

NATURE: is a tonecontrol for filtering and to control what register distorts.

Turning CCW gives more lowend and also distortion in the lower registers.

Turning CW gives an emphasis in the upper midrange for more protruding solo bass tone.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.

Parts list 35 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

Check before you build · 4 values the reader of this layout was not sure of
  • 14K7 x3 (two at the left edge, one right of the 10K near the IC): printed clearly, unusual value
  • 147K (right side, under the 47R): printed clearly, unusual value
  • 2K6 (lower left, beside the 22n): printed clearly, unusual value
  • Green LEDs: legend says 'D1 & D2 are 3mm green LEDs' but the LEDs drawn are D4 and D5; taken as a legend typo
RefValueNormalizedTypeNotes
Resistors 15
×210M10Mread from the layout by eye
×31M1Mread from the layout by eye
×314K714.7kread from the layout by eye
×210K10kread from the layout by eye
×247K47kread from the layout by eye
×21K1kread from the layout by eye
×130K30kread from the layout by eye
×1360K360kread from the layout by eye
×12K2kread from the layout by eye
×147R47read from the layout by eye
×1147K147kread from the layout by eye
×12K62.6kread from the layout by eye
×11K51.5kread from the layout by eye
×127K27kread from the layout by eye
×15K65.6kread from the layout by eye
Capacitors 12
×147p47pread from the layout by eye
×1100p100pread from the layout by eye
×1470p470pread from the layout by eye
×14n74.7nread from the layout by eye
×222n22nread from the layout by eye
×347n47nread from the layout by eye
×2220n220nread from the layout by eye
×21u1uelectrolytic; read from the layout by eye
×14u74.7uelectrolytic; read from the layout by eye
×110u10uelectrolytic; read from the layout by eye
×122u22uelectrolytic; read from the layout by eye
×1100u100uelectrolytic; read from the layout by eye
Diodes 1
×31N40011N4001D1, D2, D3; read from the layout by eye
Transistors 2
Q1BF244ABF244AJFET; read from the layout by eye
Q2BF244ABF244AJFET; read from the layout by eye
ICs 1
IC1CA3130CA3130read from the layout by eye
Potentiometers 3
DriveA1MA1MPotentiometerread from the layout by eye
NatureA50KA50kPotentiometerread from the layout by eye
VolumeB50KB50kPotentiometerread from the layout by eye
LEDs 1
×23mm green LED3MM GREEN LEDD4, D5; legend calls them D1 & D2; read from the layout by eye

Other boards based on the Mad Professor Blueberry Bass Overdrive