Enclosure not stated · 1 knob
EHX Screaming BirdVerified
Based on the Electro-Harmonix Screaming Bird· 3 other boards clone it
From the post
Request. This layout is based on the schematic for the original Screaming Bird and as such some of the values are a bit unusual today. Try 2n2 for input and output caps, and 47K and 470K for base resistors.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.
Parts list 8 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 4 | ||||
| ×1 | 10K | 10k | read from the layout by eye | |
| ×1 | 430K | 430k | read from the layout by eye | |
| ×1 | 43K | 43k | read from the layout by eye | |
| ×1 | 390R | 390 | read from the layout by eye | |
| Capacitors 2 | ||||
| ×2 | 2n | 2n | read from the layout by eye | |
| ×1 | 47u | 47u | electrolytic; read from the layout by eye | |
| Transistors 1 | ||||
| Q1 | 2N5088 | 2N5088 | Q1 was 2N5133 which will be hard to source, so try 2N5088 as a replacement; read from the layout by eye | |
| Potentiometers 1 | ||||
| Boost | B100K | B100k | Potentiometer | read from the layout by eye |
Other boards based on the Electro-Harmonix Screaming Bird
- Screaming Bird Guitar-Electronics.eu · €3.13
- Treble Booster Screaming Bird Tayda Electronics (DHEA) · $6.00
- Electro-Harmonix Screaming Bird Treble Booster turretboard.org