Enclosure not stated · 3 knobs
Clark GainsterVerified
Based on the Clark Gainster· 3 other boards clone it
From the post
This pedal originally used large Russian Paper-in-Oil capacitors, and so this layout has been done to accommodate those large caps. If you intend to use smaller caps, then the layout can be easily reduced in size and 3 or 4 of the links can be removed.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.
Parts list 14 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 1 value the reader of this layout was not sure of
- Three diodes at the top centre of the board (right of the 120p and 10K): drawn as black bodies with no type printed
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 4 | ||||
| ×5 | 10K | 10k | read from the layout by eye | |
| ×1 | 1K | 1k | read from the layout by eye | |
| ×1 | 1M | 1M | read from the layout by eye | |
| ×1 | 22K | 22k | read from the layout by eye | |
| Capacitors 5 | ||||
| ×1 | 120p | 120p | read from the layout by eye | |
| ×1 | 2N2 | 2.2n | read from the layout by eye | |
| ×1 | 47nF | 47n | read from the layout by eye | |
| ×2 | 100nF | 100n | read from the layout by eye | |
| ×1 | 47u | 47u | electrolytic; read from the layout by eye | |
| Diodes 1 | ||||
| ×3 | ? | ? | value not given; read from the layout by eye | |
| ICs 1 | ||||
| IC1 | LF353 | LF353 | read from the layout by eye | |
| Potentiometers 3 | ||||
| Gain | A1M | A1M | Potentiometer | read from the layout by eye |
| Tone | B25K | B25k | Potentiometer | read from the layout by eye |
| Level | A500K | A500k | Potentiometer | read from the layout by eye |
Other boards based on the Clark Gainster
- Clark Gainster Effects Layouts (blog) · 1590B
- Gainer Fuzz Dog · 1590B · £31.20
- Clark Gainster - compact version Tagboard Effects · 1590B