Enclosure not stated · 1 knob
Soulsonic JFET BoostVerified
Based on the SoulSonic FX JFET Boost
- Category
- Boost
- Controls
- Gain
- Build
- Turret board
- Layout
- Verified · Tagboard Effects marks it as built and working
- Tags
- Booster
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.
Parts list 11 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 5 | ||||
| ×1 | 330K | 330k | read from the layout by eye | |
| ×1 | 10K | 10k | read from the layout by eye | |
| ×1 | 1K | 1k | read from the layout by eye | |
| ×1 | 1M | 1M | read from the layout by eye | |
| ×1 | 100R | 100 | read from the layout by eye | |
| Capacitors 3 | ||||
| ×1 | 1uF | 1u | drawn as a film cap; read from the layout by eye | |
| ×1 | 100nF | 100n | read from the layout by eye | |
| ×1 | 22uF | 22u | electrolytic; read from the layout by eye | |
| Transistors 1 | ||||
| ×1 | 2SK117 | 2SK117 | JFET; read from the layout by eye | |
| Potentiometers 1 | ||||
| Gain | 5K | 5k | Potentiometer | read from the layout by eye |
| Trimmers 1 | ||||
| TR1 | 5K | 5k | 3 to source, 2 & 1 linked to ground; adjust to +5V at the test point; read from the layout by eye | |