Akashic Guitar effects circuit lookup
DISTTREBLEVOLUME

Enclosure not stated · 3 knobs

Revolution Deux

BJF Dyna Red Distortion

Based on the BJFE Dyna Red Distortion· 1 other board clones it

Category
Overdrive
Controls
Dist · Treble · Volume
Price
see vendor
Also as
Perfboard layout · from Revolution Deux
Tags
freestompboxes.org trace

From the vendor

Bjorn Juhl's Dyna Red: a CA3130 op-amp gain stage with two red LEDs clipping in the feedback loop, a 1N4001 diode pair to ground after it, a treble control, and a 2N5458 JFET buffer before the volume. A 470p cap feeds the output back to the input stage to lower high-frequency gain. Smooth top end and a dynamic response.

The author suggests adding the bass control from Paul C's Timmy.

Schematic

The schematic is in the post. Open it at Revolution Deux. No KiCad fragment has been drawn for this circuit yet.

Parts list 40 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

Fixes to the schematic, from the post

  • The 0.47u cap in the op-amp's feedback/gain leg (in series with the 1K to ground) is drawn as 0.47u because the traced unit was modded by Bjorn for more lower-mid character; Soulsonic found that 0.1u restores the original sound.
RefValueNormalizedTypeNotes
Resistors 15
R11M1Mread from the schematic by eye
R2360K360kread from the schematic by eye
R315K15kread from the schematic by eye
R43K3kread from the schematic by eye
R56.8K6.8kread from the schematic by eye
R61K1kread from the schematic by eye
R71K1kread from the schematic by eye
R83K3kread from the schematic by eye
R91M1Mread from the schematic by eye
R1010K10kread from the schematic by eye
R114.7K4.7kread from the schematic by eye
R124747read from the schematic by eye
R1347K47kbias divider; read from the schematic by eye
R1447K47kbias divider; read from the schematic by eye
R153K3kLED; read from the schematic by eye
Capacitors 13
C122n22nmarked 223; read from the schematic by eye
C2100p100pcompensation, marked 101; read from the schematic by eye
C3100p100pfeedback, marked 101; read from the schematic by eye
C410u10uelectrolytic, 16V; read from the schematic by eye
C5100n100ndrawn 0.47u/50V; the post says 0.1u restores the original sound; read from the schematic by eye
C6470p470pmarked 471; read from the schematic by eye
C71u1uelectrolytic, 50V; read from the schematic by eye
C847n47nmarked 473; read from the schematic by eye
C922n22nmarked 223; read from the schematic by eye
C1022n22nmarked 223; read from the schematic by eye
C111u1uelectrolytic, 50V; read from the schematic by eye
C12100u100uelectrolytic, 25V; read from the schematic by eye
C1322u22uelectrolytic, 25V; read from the schematic by eye
Diodes 4
D11N40011N4001read from the schematic by eye
D21N40011N4001read from the schematic by eye
D31N40011N4001read from the schematic by eye
D43.6V zener3V6in series with the LED; read from the schematic by eye
Transistors 1
Q12N54582N5458read from the schematic by eye
ICs 1
IC1CA3130EZCA3130EZread from the schematic by eye
Potentiometers 3
DistA500KA500kPotentiometerread from the schematic by eye
TrebleB50KB50kPotentiometerread from the schematic by eye
VolumeB50KB50kPotentiometerread from the schematic by eye
LEDs 3
LED1redRED1.8V, feedback clipping; read from the schematic by eye
LED2redRED1.8V, feedback clipping; read from the schematic by eye
LED3LEDLEDon/off indicator; read from the schematic by eye

Other boards based on the BJFE Dyna Red Distortion