Enclosure not stated · 3 knobs
Skreddy Mayo
Based on the Skreddy Mayo· 2 other boards clone it
- Category
- Fuzz
- Price
- see vendor
- Also as
- Vero layout · from Revolution Deux
From the vendor
Skreddy's take on the Electro-Harmonix Big Muff, voiced after the Muff sound of the Smashing Pumpkins' 'Siamese Dream' (named for the song 'Mayonaise'). It is a four-transistor (2N5133) Big Muff with R19 and C5 swapped from the standard order and added CX and RX parts. The designer stresses using the exact part types specified (carbon composition resistors, ceramic capacitors, metal film for C5-C7); the post's author found it one of the best Muff variants he had breadboarded.
The tone stack shown is the classic mid scoop; for flat mids, replace C8 and C9 both with 5.6n. Skreddy Pink Flesh work-alike (per Marc): C1 10u, C8 4.7n, CX 220p-470p, C3 68n, a switch to put 4.7n in parallel with C9 for a mid boost, and a 100 ohm resistor after DX (plus transistor selection). The vero layout adds a three-position scooped/flat/boosted mids switch using 4.7n and 10n capacitors. The 3PDT footswitch is wired to ground the input in bypass (not shown).
Schematic
The schematic is in the post. Open it at Revolution Deux. No KiCad fragment has been drawn for this circuit yet.
Parts list 52 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 3 values the reader of this schematic was not sure of
- The schematic notes that the CX value is not certain: it is a small ceramic capacitor marked only '47'.
- D1-D4 are given as 1N914 with a question mark on the schematic.
- C13 is drawn as 0.2uF; the vero layout uses 220n.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 24 | ||||
| R1 | 820 | 820 | carbon comp; read from the schematic by eye | |
| R2 | 33K | 33k | read from the schematic by eye | |
| R3 | 100K | 100k | read from the schematic by eye | |
| R4 | 2.7K | 2.7k | read from the schematic by eye | |
| R5 | 33K | 33k | read from the schematic by eye | |
| R6 | 8.2K | 8.2k | read from the schematic by eye | |
| R7 | 390K | 390k | read from the schematic by eye | |
| R8 | 33K | 33k | read from the schematic by eye | |
| R9 | 470K | 470k | read from the schematic by eye | |
| R10 | 100 | 100 | read from the schematic by eye | |
| R11 | 18K | 18k | read from the schematic by eye | |
| R12 | 8.2K | 8.2k | read from the schematic by eye | |
| R13 | 18K | 18k | read from the schematic by eye | |
| R14 | 100K | 100k | read from the schematic by eye | |
| R15 | 470K | 470k | read from the schematic by eye | |
| R16 | 100 | 100 | read from the schematic by eye | |
| R17 | 470K | 470k | read from the schematic by eye | |
| R18 | 10K | 10k | read from the schematic by eye | |
| R19 | 8.2K | 8.2k | read from the schematic by eye | |
| R20 | 56K | 56k | read from the schematic by eye | |
| R21 | 100K | 100k | read from the schematic by eye | |
| R22 | 100 | 100 | read from the schematic by eye | |
| R23 | 8.2K | 8.2k | LED resistor, carbon film; read from the schematic by eye | |
| RX | 2.7K | 2.7k | read from the schematic by eye | |
| Capacitors 15 | ||||
| C1 | 100n | 100n | ceramic; read from the schematic by eye | |
| C2 | 100n | 100n | ceramic; read from the schematic by eye | |
| C3 | 100n | 100n | ceramic; read from the schematic by eye | |
| C4 | 100n | 100n | ceramic; read from the schematic by eye | |
| C5 | 220n | 220n | 250V metal film; read from the schematic by eye | |
| C6 | 220n | 220n | 63V metal film; read from the schematic by eye | |
| C7 | 220n | 220n | 63V metal film; read from the schematic by eye | |
| C8 | 10n | 10n | ceramic; read from the schematic by eye | |
| C9 | 4.7n | 4.7n | ceramic; read from the schematic by eye | |
| C10 | 470p | 470p | ceramic; read from the schematic by eye | |
| C11 | 470p | 470p | ceramic; read from the schematic by eye | |
| C12 | 470p | 470p | ceramic; read from the schematic by eye | |
| C13 | 200n | 200n | drawn 0.2uF; 220n on the layout; read from the schematic by eye | |
| C15 | 100u | 100u | electrolytic; read from the schematic by eye | |
| CX | 47p | 47p | ceramic, marked '47', value uncertain; read from the schematic by eye | |
| Diodes 5 | ||||
| D1 | 1N914 | 1N914 | clipping; read from the schematic by eye | |
| D2 | 1N914 | 1N914 | clipping; read from the schematic by eye | |
| D3 | 1N914 | 1N914 | clipping; read from the schematic by eye | |
| D4 | 1N914 | 1N914 | clipping; read from the schematic by eye | |
| DX | ? | ? | reverse polarity, type not drawn (1N4001 on the layout); read from the schematic by eye | |
| Transistors 4 | ||||
| Q1 | 2N5133 | 2N5133 | read from the schematic by eye | |
| Q2 | 2N5133 | 2N5133 | read from the schematic by eye | |
| Q3 | 2N5133 | 2N5133 | read from the schematic by eye | |
| Q4 | 2N5133 | 2N5133 | read from the schematic by eye | |
| Potentiometers 3 | ||||
| Sustain | B100K | B100k | Potentiometer | read from the schematic by eye |
| Tone | B100K | B100k | Potentiometer | read from the schematic by eye |
| Volume | B100K | B100k | Potentiometer | read from the schematic by eye |
| LEDs 1 | ||||
| LED | LED | LED | ultrabright red; read from the schematic by eye | |
Other boards based on the Skreddy Mayo
- Skreddy Mayo Dirtbox Layouts
- Skreddy Mayo Tagboard Effects