Sliver Overdrive

From the vendor

Controls

• Volume

• Drive

• Tone

• Bass (Internal trim pot)

• Mid (Internal trim pot)

• Presence (Internal trim pot)

Specifications

• Designed for a 125B enclosure with top-mounted jacks

The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.

Ref	Value	Normalized	Type	Notes
Resistors 15
R1	1M	1M	Resistor, 1/4W
R2	470K	470k	Resistor, 1/4W
R3	10K	10k	Resistor, 1/4W
R4	13K3	13.3k	Resistor, 1/4W
R5	470R	470	Resistor, 1/4W
R6	1K	1k	Resistor, 1/4W
R7	3K6	3.6k	Resistor, 1/4W
R8	1K8	1.8k	Resistor, 1/4W
R9	150K	150k	Resistor, 1/4W
R10	470K	470k	Resistor, 1/4W
R11	3K	3k	Resistor, 1/4W
R100	4K7	4.7k	Resistor, 1/4W
R101	10K	10k	Resistor, 1/4W
R102	10K	10k	Resistor, 1/4W
R103	91R	91	Resistor, 1/4W
Capacitors 12
C1	56n	56n	Film capacitor, 7.2 x 2.5mm
C2	100p	100p	Ceramic capacitor
C3	27n	27n	Film capacitor, 7.2 x 2.5mm
C4	10n	10n	Film capacitor, 7.2 x 2.5mm
C5	20n	20n	Film capacitor, 7.2 x 2.5mm
C6	10n	10n	Film capacitor, 7.2 x 2.5mm
C7	56n	56n	Film capacitor, 7.2 x 2.5mm
C8	56n	56n	Film capacitor, 7.2 x 2.5mm
C9	10n	10n	Film capacitor, 7.2 x 2.5mm
C10	4u7	4.7u	Electrolytic capacitor, 5mm
C100	100u	100u	Electrolytic capacitor, 5mm
C101	47u	47u	Electrolytic capacitor, 5mm
Diodes 5
D1	1N4148	1N4148	Signal diode, DO-35
D2	1N4148	1N4148	Signal diode, DO-35
D3	1N4148	1N4148	Signal diode, DO-35
D4	1N4148	1N4148	Signal diode, DO-35
D100	1N5817	1N5817	Schottky diode, DO-41
ICs 1
IC1	JRC4559D	JRC4559D	Dual op-amp, DIP8
Potentiometers 3
VOLUME	A100K	A100k	16mm right-angle PCB mount pot
TONE	B100K	B100k	16mm right-angle PCB mount pot
DRIVE	A1M	A1M	16mm right-angle PCB mount pot
Trimmers 3
BASS	50K	50k	Trim potentiometer	3362P-type
PRES	10K	10k	Trim potentiometer	3362P-type
MID	10K	10k	Trim potentiometer	3362P-type