125B · 4 knobs
PedalPCB· PCB716
Article 59 Overdrive
Based on the Marshall 1959 Pedal· 1 other board clones it
- Category
- Fuzz· OD / Distortion / Fuzz
- Price
- $12.00in stock
- Tags
- 125B, 125B 4-Knob (Type 1)
From the vendor
Controls
• Volume
• Tone
• Treble
• Normal
Details
• Designed for a 125B enclosure with top-mounted jacks
The company, product and service names used in this web site are for comparative purposes only. All trademarks and registered trademarks are the property of their respective owners. This product is not manufactured or distributed by Marshall Amplification, maker of the Marshall Amplification 1959 Overdrive Pedal.
PedalPCB is in no way affiliated with Marshall Amplification.
Schematic
The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 55 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 23 | ||||
| R1 | 2M2 | 2.2M | Resistor, 1/4W | |
| R2 | 2M2 | 2.2M | Resistor, 1/4W | |
| R3 | 4K7 | 4.7k | Resistor, 1/4W | |
| R4 | 6K8 | 6.8k | Resistor, 1/4W | |
| R5 | 10K | 10k | Resistor, 1/4W | |
| R6 | 2K2 | 2.2k | Resistor, 1/4W | |
| R7 | 5K6 | 5.6k | Resistor, 1/4W | |
| R8 | 5K6 | 5.6k | Resistor, 1/4W | |
| R9 | 3K3 | 3.3k | Resistor, 1/4W | |
| R10 | 3K3 | 3.3k | Resistor, 1/4W | |
| R11 | 4K7 | 4.7k | Resistor, 1/4W | |
| R12 | 4K7 | 4.7k | Resistor, 1/4W | |
| R13 | 470K | 470k | Resistor, 1/4W | |
| R14 | 1K | 1k | Resistor, 1/4W | |
| R15 | 10K | 10k | Resistor, 1/4W | |
| R16 | 470K | 470k | Resistor, 1/4W | |
| R17 | 22K | 22k | Resistor, 1/4W | |
| R18 | 1K | 1k | Resistor, 1/4W | |
| R19 | 470K | 470k | Resistor, 1/4W | |
| R100 | 22R | 22 | Resistor, 1/4W | |
| R101 | 10K | 10k | Resistor, 1/4W | |
| R102 | 10K | 10k | Resistor, 1/4W | |
| CLR | 4K7 | 4.7k | Resistor, 1/4W | * LED current limiting resistor |
| Capacitors 21 | ||||
| C1 | 22n | 22n | Film capacitor, 7.2 x 2.5mm | |
| C2 | 1n | 1n | Film capacitor, 7.2 x 2.5mm | |
| C3 | 22n | 22n | Film capacitor, 7.2 x 2.5mm | |
| C4 | 100p | 100p | Ceramic capacitor | |
| C5 | 100p | 100p | Ceramic capacitor | |
| C6 | 330n | 330n | Film capacitor, 7.2 x 5mm | |
| C7 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C8 | 470n | 470n | Film capacitor, 7.2 x 5mm | |
| C9 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C10 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C11 | 4n7 | 4.7n | Film capacitor, 7.2 x 2.5mm | |
| C12 | 100p | 100p | Ceramic capacitor | |
| C13 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C14 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C15 | 470n | 470n | Film capacitor, 7.2 x 5mm | |
| C16 | 1u | 1u | Film capacitor, 7.2 x 5mm | |
| C17 | 100p | 100p | Ceramic capacitor | |
| C18 | 470n | 470n | Film capacitor, 7.2 x 5mm | |
| C100 | 100u | 100u | Electrolytic capacitor, 5mm | |
| C101 | 100u | 100u | Electrolytic capacitor, 5mm | |
| C102 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| Diodes 4 | ||||
| D1 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D2 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D100 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| D101 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| ICs 3 | ||||
| IC1 | TL072 | TL072 | Dual op-amp, DIP8 | Link |
| IC2 | MC33178 | MC33178 | Dual op-amp, DIP8 | Link |
| IC3 | MC33178 | MC33178 | Dual op-amp, DIP8 | Link |
| Potentiometers 4 | ||||
| VOLUME | A100K | A100k | 16mm right-angle PCB mount pot | |
| TONE | B10K | B10k | 16mm right-angle PCB mount pot | |
| TREBLE | A10K | A10k | 16mm right-angle PCB mount pot | |
| NORMAL | B10K | B10k | 16mm right-angle PCB mount pot | |
Other boards based on the Marshall 1959 Pedal
- Marshall 1959 Pedal Dirtbox Layouts