125B · 4 knobs
PedalPCB· PCB704
Eight Ball Overdrive
Based on the Marshall JCM800· 1 other board clones it
- Category
- Fuzz· OD / Distortion / Fuzz
- Controls
- Volume · Gain · Tone · Sensitivity
- Price
- $12.00in stock
- Tags
- 125B, 125B 4-Knob (Type 1)
From the vendor
Controls
• Volume
• Gain
• Tone
• Sensitivity
Details
• Designed for a 125B enclosure with top-mounted jacks
The company, product and service names used in this web site are for comparative purposes only. All trademarks and registered trademarks are the property of their respective owners. This product is not manufactured or distributed by Marshall Amplification, maker of the Marshall Amplification JCM800 Overdrive Pedal.
PedalPCB is in no way affiliated with Marshall Amplification.
Schematic
The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 54 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 23 | ||||
| R1 | 2M2 | 2.2M | Resistor, 1/4W | |
| R2 | 2M2 | 2.2M | Resistor, 1/4W | |
| R3 | 4K7 | 4.7k | Resistor, 1/4W | |
| R4 | 10K | 10k | Resistor, 1/4W | |
| R5 | 22K | 22k | Resistor, 1/4W | |
| R6 | 330R | 330 | Resistor, 1/4W | |
| R7 | 10K | 10k | Resistor, 1/4W | |
| R8 | 470K | 470k | Resistor, 1/4W | |
| R9 | 100R | 100 | Resistor, 1/4W | |
| R10 | 10K | 10k | Resistor, 1/4W | |
| R11 | 22K | 22k | Resistor, 1/4W | |
| R12 | 22K | 22k | Resistor, 1/4W | |
| R13 | 47K | 47k | Resistor, 1/4W | |
| R14 | 47K | 47k | Resistor, 1/4W | |
| R15 | 1M | 1M | Resistor, 1/4W | |
| R16 | 100K | 100k | Resistor, 1/4W | |
| R17 | 470K | 470k | Resistor, 1/4W | |
| R18 | 1K | 1k | Resistor, 1/4W | |
| R19 | 470K | 470k | Resistor, 1/4W | |
| R100 | 22R | 22 | Resistor, 1/4W | |
| R101 | 10K | 10k | Resistor, 1/4W | |
| R102 | 10K | 10k | Resistor, 1/4W | |
| CLR | 4K7 | 4.7k | Resistor, 1/4W | * LED current limiting resistor |
| Capacitors 19 | ||||
| C1 | 22n | 22n | Film capacitor, 7.2 x 2.5mm | |
| C2 | 1n | 1n | Film capacitor, 7.2 x 2.5mm | |
| C3 | 220n | 220n | Film capacitor, 7.2 x 5mm | |
| C4 | 220n | 220n | Film capacitor, 7.2 x 5mm | |
| C5 | 68n | 68n | Film capacitor, 7.2 x 2.5mm | |
| C6 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C7 | 100p | 100p | Ceramic capacitor | |
| C8 | 470n | 470n | Film capacitor, 7.2 x 5mm | |
| C9 | 220n | 220n | Film capacitor, 7.2 x 5mm | |
| C10 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C11 | 150p | 150p | Ceramic capacitor | |
| C12 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C13 | 68n | 68n | Film capacitor, 7.2 x 2.5mm | |
| C14 | 470n | 470n | Film capacitor, 7.2 x 5mm | |
| C15 | 470n | 470n | Film capacitor, 7.2 x 5mm | |
| C100 | 220u | 220u | Electrolytic capacitor, 5mm | |
| C101 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C102 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C103 | 100u | 100u | Electrolytic capacitor, 5mm | |
| Diodes 5 | ||||
| D1 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D2 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D3 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D4 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D100 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| Transistors 1 | ||||
| Q1 | 2SK209G | 2SK209G | JFET transistor, N-channel | |
| ICs 2 | ||||
| IC1 | MC33178 | MC33178 | Dual op-amp, DIP8 | Link |
| IC2 | MC33178 | MC33178 | Dual op-amp, DIP8 | |
| Potentiometers 4 | ||||
| VOLUME | A100K | A100k | 16mm right-angle PCB mount pot | |
| GAIN | A25K | A25k | 16mm right-angle PCB mount pot | |
| TONE | B10K | B10k | 16mm right-angle PCB mount pot | |
| SENS | A1M | A1M | 16mm right-angle PCB mount pot | |
Other boards based on the Marshall JCM800
- Blowball Overdrive HotKits · 1590B · $8.00