125B · 3 knobs
PedalPCB· PCB692
White Washer Distortion
Based on the Mr Black White Widow Distortion
- Category
- Fuzz· OD / Distortion / Fuzz
- Controls
- Volume · Tone · Gain
- Price
- $10.00in stock
- Tags
- 125B, 125B 3-Knob (Type 1)
From the vendor
Controls
• Volume
• Tone
• Gain
Specifications
• Designed for a 125B enclosure with top-mounted jacks
Documentation
Schematic
The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 27 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 10 | ||||
| R1 | 470K | 470k | Resistor, 1/4W | |
| R2 | 1K | 1k | Resistor, 1/4W | |
| R3 | 100R | 100 | Resistor, 1/4W | |
| R4 | 10K | 10k | Resistor, 1/4W | |
| R5 | 10K | 10k | Resistor, 1/4W | |
| R6 | 2M2 | 2.2M | Resistor, 1/4W | |
| R100 | 100R | 100 | Resistor, 1/4W | |
| R101 | 51K | 51k | Resistor, 1/4W | |
| R102 | 51K | 51k | Resistor, 1/4W | |
| CLR | 4K7 | 4.7k | Resistor, 1/4W | * LED current limiting resistor |
| Capacitors 10 | ||||
| C1 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C2 | 1n | 1n | Film capacitor, 7.2 x 2.5mm | |
| C3 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C4 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C5 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C6 | 4n7 | 4.7n | Film capacitor, 7.2 x 2.5mm | |
| C7 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C100 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C101 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C102 | 1u | 1u | Electrolytic capacitor, 5mm | |
| Diodes 3 | ||||
| D1 | 5mm Red | 5MM RED | 5mm Red LED, Diffused | |
| D2 | 5mm Red | 5MM RED | 5mm Red LED, Diffused | |
| D100 | 1N4148 | 1N4148 | Switching diode, DO-35 | |
| ICs 1 | ||||
| IC1 | RC4558P | RC4558P | Dual op-amp, DIP8 | |
| Potentiometers 3 | ||||
| VOLUME | B50K | B50k | 16mm right-angle PCB mount pot | |
| TONE | B50K | B50k | 16mm right-angle PCB mount pot | |
| GAIN | B50K | B50k | 16mm right-angle PCB mount pot | |