125B · 2 knobs
From the vendor
Controls
• A/B Footswitch
• Y Footswitch
Specifications
• Completely passive signal path
• 9VDC only required for LED indicators (Battery or DC IN)
• Designed for a 125B enclosure
Documentation
Schematic
The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 10 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 2 | ||||
| CLR_A | 4K7 | 4.7k | Resistor, 1/4W | * LED current limiting resistor |
| CLR_B | 4K7 | 4.7k | Resistor, 1/4W | * LED current limiting resistor |
| Capacitors 1 | ||||
| C100 | 10u | 10u | Electrolytic capacitor, 5mm | |
| Diodes 1 | ||||
| D100 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| ICs 1 | ||||
| DIP | DIP3 | DIP3 | Dip switch (3-pole) Link | |
| Switches 2 | ||||
| SW_AB | 3PDT | 3PDT | 3PDT Latching Footswitch | Link |
| SW_Y | 3PDT | 3PDT | 3PDT Latching Footswitch | Link |
| Jacks & sockets 3 | ||||
| JACK_A | NMJ6HCD2 | NMJ6HCD2 | Neutrik ¼” Insulated Stereo Jack | Alternative: Tayda A-1122 |
| JACK_B | NMJ6HCD2 | NMJ6HCD2 | Neutrik ¼” Insulated Stereo Jack | Alternative: Tayda A-1122 |
| JACK_IN | NMJ6HCD2 | NMJ6HCD2 | Neutrik ¼” Insulated Stereo Jack | Alternative: Tayda A-1122 |