125B · 4 knobs
PedalPCB· PCB637
Sequel Distortion
Based on the MXR Distortion II· 3 other boards clone it
- Category
- Distortion
- Price
- $12.00in stock
- Tags
- 125B, 125B 4-Knob (Type 1)
From the vendor
Controls
• Volume
• Drive
• Filter
• Resonance
Details
• Designed for a 125B enclosure with top-mounted jacks
The company, product and service names used in this web site are for comparative purposes only. All trademarks and registered trademarks are the property of their respective owners. This product is not manufactured or distributed by MXR, maker of the MXR Distortion II.
PedalPCB is in no way affiliated with MXR.
Schematic
The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 54 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 21 | ||||
| R1 | 1M | 1M | Resistor, 1/4W | |
| R2 | 1K | 1k | Resistor, 1/4W | |
| R3 | 1M | 1M | Resistor, 1/4W | |
| R4 | 4K7 | 4.7k | Resistor, 1/4W | |
| R5 | 240K | 240k | Resistor, 1/4W | |
| R6 | 2K | 2k | Resistor, 1/4W | |
| R7 | 36K | 36k | Resistor, 1/4W | |
| R8 | 10K | 10k | Resistor, 1/4W | |
| R9 | 75K | 75k | Resistor, 1/4W | |
| R10 | 300K | 300k | Resistor, 1/4W | |
| R11 | 1M | 1M | Resistor, 1/4W | |
| R12 | 36K | 36k | Resistor, 1/4W | |
| R13 | 75K | 75k | Resistor, 1/4W | |
| R14 | 3K | 3k | Resistor, 1/4W | |
| R15 | 300K | 300k | Resistor, 1/4W | |
| R16 | 10K | 10k | Resistor, 1/4W | |
| R17 | 10K | 10k | Resistor, 1/4W | |
| R18 | 10K | 10k | Resistor, 1/4W | |
| R100 | 10K | 10k | Resistor, 1/4W | |
| R101 | 10K | 10k | Resistor, 1/4W | |
| CLR | 4K7 | 4.7k | Resistor, 1/4W | * LED current limiting resistor |
| Capacitors 18 | ||||
| C1 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C2 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C3 | 20p | 20p | Ceramic capacitor | |
| C4 | 22n | 22n | Film capacitor, 7.2 x 2.5mm | |
| C5 | 10u | 10u | Electrolytic capacitor, 5mm | |
| C6 | 35n | 35n | Film capacitor, 7.2 x 2.5mm | |
| C7 | 50p | 50p | Ceramic capacitor | |
| C8 | 35n | 35n | Film capacitor, 7.2 x 2.5mm | |
| C9 | 22n | 22n | Film capacitor, 7.2 x 2.5mm | |
| C10 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C11 | 22n | 22n | Film capacitor, 7.2 x 2.5mm | |
| C12 | 22n | 22n | Film capacitor, 7.2 x 2.5mm | |
| C13 | 1n | 1n | Film capacitor, 7.2 x 2.5mm | |
| C14 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C100 | 100u | 100u | Electrolytic capacitor, 5mm | |
| C101 | 10u | 10u | Electrolytic capacitor, 5mm | � 25V minimum |
| C102 | 100u | 100u | Electrolytic capacitor, 5mm | � 25V minimum |
| C103 | 10u | 10u | Electrolytic capacitor, 5mm | |
| Diodes 7 | ||||
| D1 | 1N914 | 1N914 | Signal diode, DO-35 | |
| D2 | 1N914 | 1N914 | Signal diode, DO-35 | |
| D3 | 1N914 | 1N914 | Signal diode, DO-35 | |
| D4 | 1N914 | 1N914 | Signal diode, DO-35 | |
| D100 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| D101 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| D102 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| ICs 4 | ||||
| IC1 | TL072 | TL072 | Dual op-amp, DIP8 | |
| IC2 | TL072 | TL072 | Dual op-amp, DIP8 | |
| IC3 | TL072 | TL072 | Dual op-amp, DIP8 | |
| IC100 | ICL7660SCPA | ICL7660SCPA | Charge pump IC, DIP8 | |
| Potentiometers 4 | ||||
| VOLUME | A50K | A50k | 16mm right-angle PCB mount pot | |
| DRIVE | B50K | B50k | 16mm right-angle PCB mount pot | |
| FILTER | A500K | A500k | 16mm right-angle PCB mount pot | |
| RESONANCE | B50K | B50k | 16mm right-angle PCB mount pot | |
Other boards based on the MXR Distortion II
- MXR Distortion II Effects Layouts (blog) · 1590B
- DisDis Distortion Lectric-FX · $8.99
- El Distorto Segundo Moody Sounds · kr895.00