Regular Fuzz

From the vendor

Controls

• Volume

• Gate

• Fuzz

• Low (Internal trim pot)

• Threshold (Internal trim pot)

Specifications

• Designed for a 125B enclosure with top-mounted jacks

Documentation

The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.

Ref	Value	Normalized	Type	Notes
Resistors 6
R1	1M	1M	Resistor, 1/4W
R2	3M3	3.3M	Resistor, 1/4W
R3	2K4	2.4k	Resistor, 1/4W
R4	1M	1M	Resistor, 1/4W
R5	3K9	3.9k	Resistor, 1/4W
CLR	4K7	4.7k	Resistor, 1/4W	* LED current limiting resistor
Capacitors 8
C1	2n2	2.2n	Film capacitor, 7.2 x 2.5mm
C2	5n6	5.6n	Film capacitor, 7.2 x 2.5mm
C3	10u	10u	Electrolytic capacitor, 5mm
C4	100n	100n	Film capacitor, 7.2 x 2.5mm
C5	220p	220p	Ceramic capacitor
C6	220u	220u	Electrolytic capacitor, 5mm
C7	10u	10u	Electrolytic capacitor, 5mm
C100	100u	100u	Electrolytic capacitor, 5mm
Diodes 3
D1	BAT46	BAT46	Signal diode, DO-35
D2	BAT46	BAT46	Signal diode, DO-35
D100	1N5817	1N5817	Schottky diode, DO-41
Transistors 2
Q1	ZTX618	ZTX618	BJT transistor, NPN TO-92	(See schematic for specs)
Q2	ZTX649	ZTX649	BJT transistor, NPN TO-92	(See schematic for specs)
Potentiometers 3
VOLUME	B250K	B250k	16mm right-angle PCB mount pot
GATE	B10K	B10k	16mm right-angle PCB mount pot
FUZZ	B1K	B1k	16mm right-angle PCB mount pot
Trimmers 2
CLIP	5K	5k	Trimmer potentiometer, 3362P type
LOW	500K	500k	Trimmer potentiometer, 3362P type