125B · 4 knobs
PedalPCB· PCB472
Pumbaa Distortion
Based on the ThorpyFX Warthog Distortion
- Category
- Fuzz· OD / Distortion / Fuzz
- Price
- $8.00in stock
From the vendor
Controls
• Volume
• Gain
• Tone
• Calibre
Details
• Designed for a 125B enclosure with top-mounted jacks
The company, product and service names used in this web site are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners.
This product is not manufactured or distributed by ThorpyFX, maker of the ThorpyFX Warthog Distortion.
PedalPCB is in no way affiliated with ThorpyFX.
Schematic
The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 40 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 15 | ||||
| R1 | 10M | 10M | Resistor, 1/4W | |
| R2 | 10M | 10M | Resistor, 1/4W | |
| R3 | 5K1 | 5.1k | Resistor, 1/4W | |
| R4 | 1K | 1k | Resistor, 1/4W | |
| R5 | 100K | 100k | Resistor, 1/4W | |
| R6 | 560R | 560 | Resistor, 1/4W | |
| R7 | 1K | 1k | Resistor, 1/4W | |
| R8 | 1K5 | 1.5k | Resistor, 1/4W | |
| R9 | 2M2 | 2.2M | Resistor, 1/4W | |
| R10 | 1M8 | 1.8M | Resistor, 1/4W | |
| R11 | 10K | 10k | Resistor, 1/4W | |
| R12 | 220R | 220 | Resistor, 1/4W | |
| R13 | 10K | 10k | Resistor, 1/4W | |
| R14 | 10K | 10k | Resistor, 1/4W | |
| R100 | 4K7 | 4.7k | Resistor, 1/4W | * LED current limiting resistor |
| Capacitors 12 | ||||
| C1 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C2 | 22n | 22n | Film capacitor, 7.2 x 2.5mm | |
| C3 | 1n | 1n | Film capacitor, 7.2 x 2.5mm | |
| C4 | 4u7 | 4.7u | Electrolytic capacitor, 5.0mm | |
| C5 | 1n | 1n | Film capacitor, 7.2 x 2.5mm | |
| C6 | 33p | 33p | Ceramic capacitor | |
| C7 | 4u7 | 4.7u | Electrolytic capacitor, 5.0mm | |
| C8 | 3n3 | 3.3n | Film capacitor, 7.2 x 2.5mm | |
| C9 | 22n | 22n | Film capacitor, 7.2 x 2.5mm | |
| C10 | 1u | 1u | Film capacitor, 7.2 x 5.0mm | |
| C11 | 47u | 47u | Electrolytic capacitor, 6.3mm | |
| C12 | 100u | 100u | Electrolytic capacitor, 6.3mm | |
| Diodes 6 | ||||
| D1 | 9V1 | 9V1 | Zener diode 1/2W, 9.1V | |
| D2 | 5mm Red | 5MM RED | 5mm Red LED | |
| D3 | 5mm Red | 5MM RED | 5mm Red LED | |
| D4 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D5 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D100 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| Transistors 2 | ||||
| Q1 | BS170 | BS170 | N-Channel MOSFET | |
| Q2 | 2N5457 | 2N5457 | JFET transistor, N-channel | |
| ICs 1 | ||||
| IC1 | OPA604AP | OPA604AP | Single op-amp, DIP8 | |
| Potentiometers 4 | ||||
| VOLUME | A100K | A100k | 16mm right-angle PCB mount pot | |
| GAIN | A100K | A100k | 16mm right-angle PCB mount pot | |
| TONE | A100K | A100k | 16mm right-angle PCB mount pot | |
| CALIBRE | C5K | C5k | 16mm right-angle PCB mount pot | |