125B · 5 knobs
PedalPCB· PCB453
Aphrodite Overdrive
Based on the ProAnalog Manticore V2· 1 other board clones it
- Category
- Fuzz· OD / Distortion / Fuzz
- Price
- $12.00in stock
From the vendor
Controls
• Volume
• Gain
• Treble
• Savage
• Drive
Details
• Designed for a 125B enclosure with top-mounted jacks
The company, product and service names used in this web site are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners.
This product is not manufactured or distributed by ProAnalog Devices, maker of the ProAnalog Manticore v2.
PedalPCB is in no way affiliated with ProAnalog Devices.
Schematic
The schematic is in the vendor's build document, page 4. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 56 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 20 | ||||
| R1 | 1K | 1k | Resistor, 1/4W | |
| R2 | 470K | 470k | Resistor, 1/4W | |
| R3 | 22K | 22k | Resistor, 1/4W | |
| R4 | 4K7 | 4.7k | Resistor, 1/4W | |
| R5 | 2K2 | 2.2k | Resistor, 1/4W | |
| R6 | 10K | 10k | Resistor, 1/4W | |
| R7 | 10K | 10k | Resistor, 1/4W | |
| R8 | 10K | 10k | Resistor, 1/4W | |
| R9 | 1K5 | 1.5k | Resistor, 1/4W | |
| R10 | 1M | 1M | Resistor, 1/4W | |
| R11 | 1K5 | 1.5k | Resistor, 1/4W | |
| R12 | 47K | 47k | Resistor, 1/4W | |
| R13 | 390K | 390k | Resistor, 1/4W | |
| R14 | 4K7 | 4.7k | Resistor, 1/4W | |
| R15 | 100K | 100k | Resistor, 1/4W | |
| R16 | 1K8 | 1.8k | Resistor, 1/4W | |
| R17 | 100K | 100k | Resistor, 1/4W | |
| R18 | 1K5 | 1.5k | Resistor, 1/4W | |
| R100 | 10R | 10 | Resistor, 1/4W | |
| CLR | 4K7 | 4.7k | Resistor, 1/4W | * LED current limiting resistor |
| Capacitors 25 | ||||
| C1 | 22n | 22n | Film capacitor, 7.2 x 2.5mm | |
| C2 | 330n | 330n | Film capacitor, 7.2 x 5.0mm | |
| C3 | 330p | 330p | Ceramic capacitor | |
| C4 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C5 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C6 | 330n | 330n | Film capacitor, 7.2 x 5.0mm | |
| C7 | 22n | 22n | Film capacitor, 7.2 x 2.5mm | |
| C8 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C9 | 220n | 220n | Film capacitor, 7.2 x 5.0mm | |
| C10 | 470p | 470p | Ceramic capacitor | |
| C11 | 1u | 1u | Film capacitor, 7.2 x 5.0mm | |
| C12 | 1u | 1u | Film capacitor, 7.2 x 5.0mm | |
| C13 | 2n2 | 2.2n | Film capacitor, 7.2 x 2.5mm | |
| C14 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C15 | 390p | 390p | Ceramic capacitor | |
| C16 | 6n8 | 6.8n | Film capacitor, 7.2 x 2.5mm | |
| C17 | 1u | 1u | Film capacitor, 7.2 x 5.0mm | |
| C100 | 220u | 220u | Electrolytic capacitor, 5mm | |
| C101 | 100u | 100u | Electrolytic capacitor, 5mm | |
| C102 | 100u | 100u | Electrolytic capacitor, 5mm | |
| C103 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C104 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C105 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C106 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C107 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | of 2) |
| Diodes 3 | ||||
| D1 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D2 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D100 | 1N5817 | 1N5817 | Schottky diode, DO-41, 1/4W | |
| ICs 3 | ||||
| IC1 | TL072 | TL072 | Dual op-amp, DIP8 | |
| IC2 | TL072 | TL072 | Dual op-amp, DIP8 | |
| IC3 | TC7662BC | TC7662BC | Charge pump IC, DIP8 | |
| Potentiometers 5 | ||||
| DRIVE | B100K | B100k | 16mm right-angle PCB mount pot | |
| GAIN | C100K | C100k | 16mm right-angle PCB mount pot | |
| SAVAGE | C10K | C10k | 16mm right-angle PCB mount pot | |
| TREBLE | C10K | C10k | 16mm right-angle PCB mount pot | |
| VOLUME | A100K | A100k | 16mm right-angle PCB mount pot | |
Other boards based on the ProAnalog Manticore V2
- Pro Analog Devices Manticore V2 Dirtbox Layouts