125B · 2 knobs
PedalPCB· PCB450
Arche Boost
Based on the ThorpyFX Heavy Water· 1 other board clones it
- Category
- Fuzz· OD / Distortion / Fuzz
- Price
- $8.00in stock
From the vendor
Controls
• Boost
• Lows
Details
• Designed for a 125B enclosure with top-mounted jacks
The company, product and service names used in this web site are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners. This product is not manufactured or distributed by ThorpyFX, maker of the ThorpyFX Heavy Water Dual Highroom Boost. PedalPCB is in no way affiliated with ThorpyFX
Schematic
The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 32 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 13 | ||||
| R1 | 10M | 10M | Resistor, 1/4W | |
| R2 | 1M | 1M | Resistor, 1/4W | |
| R3 | 100K | 100k | Resistor, 1/4W | |
| R4 | 100K | 100k | Resistor, 1/4W | |
| R5 | 4K7 | 4.7k | Resistor, 1/4W | |
| R6 | 47K | 47k | Resistor, 1/4W | |
| R7 | 8K2 | 8.2k | Resistor, 1/4W | |
| R8 | 15K | 15k | Resistor, 1/4W | |
| R9 | 220R | 220 | Resistor, 1/4W | |
| R10 | 51K | 51k | Resistor, 1/4W | |
| R100 | 10K | 10k | Resistor, 1/4W | |
| R101 | 10K | 10k | Resistor, 1/4W | |
| R102 | 4K7 | 4.7k | Resistor, 1/4W | |
| Capacitors 8 | ||||
| C1 | 220n | 220n | Film capacitor, 7.2 x 5.0mm | |
| C2 | 470n | 470n | Film capacitor, 7.2 x 5.0mm | |
| C3 | 100p | 100p | Ceramic capacitor | |
| C4 | 4n7 | 4.7n | Film capacitor, 7.2 x 2.5mm | |
| C5 | 100p | 100p | Ceramic capacitor | |
| C6 | 1u | 1u | Film capacitor, 7.2 x 5.0mm | |
| C100 | 100u | 100u | Electrolytic capacitor, 5mm | |
| C101 | 100u | 100u | Electrolytic capacitor, 5mm | |
| Diodes 7 | ||||
| D1 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D2 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D3 | 1N747A | 1N747A / 3V6 | Zener diode 1/2W, 3.6V | * See Below |
| D4 | 1N747A | 1N747A / 3V6 | Zener diode 1/2W, 3.6V | * See Below |
| D5 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D6 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D100 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| ICs 1 | ||||
| IC1 | OPA2134PA | OPA2134PA | Dual op-amp, DIP8 | |
| Potentiometers 2 | ||||
| BOOST | B100K | B100k | 16mm right-angle PCB mount pot | |
| LOW | A1M | A1M | 16mm right-angle PCB mount pot | |
| Other 1 | ||||
| (1 | N34A, 1N270, D9E | N34A, 1N270, D9E | , etc) | |
Other boards based on the ThorpyFX Heavy Water
- Thorpy Fx Heavy Water Dirtbox Layouts