Fuzz Captain

From the vendor

Controls

• Volume

• Tone

• Fuzz

• Body

• Bias

• Load

• Bright – (Toggle switch)

Specifications

• Designed for a 125B enclosure with top-mounted jacks

Documentation

The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.

Ref	Value	Normalized	Type	Notes
Resistors 14
R1	2K2	2.2k	Resistor, 1/4W
R2	470R	470	Resistor, 1/4W
R3	1M	1M	Resistor, 1/4W
R4	4K7	4.7k	Resistor, 1/4W
R5	220R	220	Resistor, 1/4W
R6	100K	100k	Resistor, 1/4W
R7	10K	10k	Resistor, 1/4W
R8	100K	100k	Resistor, 1/4W
R9	4K7	4.7k	Resistor, 1/4W
R10	22K	22k	Resistor, 1/4W
R11	2K2	2.2k	Resistor, 1/4W
R12	22K	22k	Resistor, 1/4W
R100	1K	1k	Resistor, 1/4W
R101	4K7	4.7k	Resistor, 1/4W
Capacitors 13
C1	1u	1u	Film capacitor, 7.2 x 5.0mm
C2	220p	220p	Ceramic capacitor
C3	1u	1u	Film capacitor, 7.2 x 5.0mm
C4	1u	1u	Film capacitor, 7.2 x 5.0mm
C5	100u	100u	Electrolytic capacitor, 5mm
C6	1u	1u	Film capacitor, 7.2 x 5.0mm
C7	22n	22n	Film capacitor, 7.2 x 2.5mm
C8	22n	22n	Film capacitor, 7.2 x 2.5mm
C9	1n2	1.2n	Film capacitor, 7.2 x 2.5mm
C10	3n9	3.9n	Film capacitor, 7.2 x 2.5mm
C100	100u	100u	Electrolytic capacitor, 5mm
C101	100n	100n	Film capacitor, 7.2 x 2.5mm
C102	47u	47u	Electrolytic capacitor, 5mm
Diodes 1
D100	1N5817	1N5817	Schottky diode, DO-41
Transistors 3
Q1	BC549C	BC549C	BJT transistor, NPN TO-92
Q2	BC549C	BC549C	BJT transistor, NPN TO-92
Q3	BC549C	BC549C	BJT transistor, NPN TO-92
Potentiometers 6
VOLUME	A100K	A100k	16mm right-angle PCB mount pot
TONE	B100K	B100k	16mm right-angle PCB mount pot
FUZZ	B10K	B10k	16mm right-angle PCB mount pot
BODY	A20K	A20k	16mm right-angle PCB mount pot
BIAS	B2K	B2k	16mm right-angle PCB mount pot
LOAD	A100K	A100k	16mm right-angle PCB mount pot
Trimmers 1
GAIN	1K	1k	Trim potentiometer (3362P-type)
Switches 1
BRIGHT	SPDT	SPDT	Toggle switch, SPDT	3-position (ON/OFF/ON)