125B · 4 knobs
PedalPCB· PCB374
Paper Scratcher Fuzz
Based on the Electro-Harmonix Ripped Speaker Fuzz· 2 other boards clone it
- Category
- Fuzz· OD / Distortion / Fuzz
- Price
- $10.00in stock
From the vendor
Controls
• Volume
• Rip
• Tone
• Fuzz
Details
• Designed for a 125B enclosure with top-mounted jacks
The company, product and service names used in this web site are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners. This product is not manufactured or distributed by Electro-Harmonix, maker of the Electro-Harmonix Ripped Speaker Fuzz.
PedalPCB is in no way affiliated with Electro-Harmonix.
Schematic
The schematic is in the vendor's build document, page 4. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 56 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 28 | ||||
| R1 | 2M2 | 2.2M | Resistor, 1/4W | |
| R2 | 2M2 | 2.2M | Resistor, 1/4W | |
| R3 | 1K | 1k | Resistor, 1/4W | |
| R4 | 47K | 47k | Resistor, 1/4W | |
| R5 | 430K | 430k | Resistor, 1/4W | |
| R6 | 43K | 43k | Resistor, 1/4W | |
| R7 | 10K | 10k | Resistor, 1/4W | |
| R8 | 390R | 390 | Resistor, 1/4W | |
| R9 | 390R | 390 | Resistor, 1/4W | |
| R10 | 430K | 430k | Resistor, 1/4W | |
| R11 | 43K | 43k | Resistor, 1/4W | |
| R12 | 10K | 10k | Resistor, 1/4W | |
| R13 | 390R | 390 | Resistor, 1/4W | |
| R14 | 11K | 11k | Resistor, 1/4W | |
| R15 | 2K7 | 2.7k | Resistor, 1/4W | |
| R16 | 10K | 10k | Resistor, 1/4W | |
| R17 | 390R | 390 | Resistor, 1/4W | |
| R18 | 22K | 22k | Resistor, 1/4W | |
| R19 | 4K7 | 4.7k | Resistor, 1/4W | |
| R20 | 4K7 | 4.7k | Resistor, 1/4W | |
| R21 | 22K | 22k | Resistor, 1/4W | |
| R22 | 100K | 100k | Resistor, 1/4W | |
| R23 | 100R | 100 | Resistor, 1/4W | |
| R100 | 47R | 47 | Resistor, 1/4W | |
| R101 | 4K7 | 4.7k | Resistor, 1/4W | |
| R102 | 16K | 16k | Resistor, 1/4W | |
| R103 | 22K | 22k | Resistor, 1/4W | |
| R104 | 10K | 10k | Resistor, 1/4W | |
| Capacitors 16 | ||||
| C1 | 1u | 1u | Film capacitor, 7.2 x 5.0mm | |
| C2 | 1n | 1n | Film capacitor, 7.2 x 2.5mm | |
| C3 | 10u | 10u | Electrolytic capacitor, 5mm | |
| C4 | 10u | 10u | Electrolytic capacitor, 5mm | |
| C5 | 10u | 10u | Electrolytic capacitor, 5mm | |
| C6 | 10u | 10u | Electrolytic capacitor, 5mm | |
| C7 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C8 | 18n | 18n | Film capacitor, 7.2 x 2.5mm | |
| C9 | 150p | 150p | Ceramic capacitor | |
| C10 | 18n | 18n | Film capacitor, 7.2 x 2.5mm | |
| C11 | 10u | 10u | Electrolytic capacitor, 5mm | |
| C100 | 100u | 100u | Electrolytic capacitor, 5mm | |
| C101 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C102 | 100u | 100u | Electrolytic capacitor, 5mm | |
| C103 | 100u | 100u | Electrolytic capacitor, 5mm | |
| C104 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | of 2) |
| Diodes 3 | ||||
| D1 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D2 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D100 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| Transistors 4 | ||||
| Q1 | 2N3904 | 2N3904 | BJT transistor, NPN TO-92 | |
| Q2 | 2N3904 | 2N3904 | BJT transistor, NPN TO-92 | |
| Q3 | 2N3904 | 2N3904 | BJT transistor, NPN TO-92 | |
| Q4 | 2N5088 | 2N5088 | BJT transistor, NPN TO-92 | |
| ICs 1 | ||||
| IC1 | OPA1678 | OPA1678 | Dual op-amp, DIP8 | Substitute: OPA2134 |
| Potentiometers 4 | ||||
| VOL | A100K | A100k | 16mm right-angle PCB mount pot | |
| RIP | A100K | A100k | 16mm right-angle PCB mount pot | |
| TONE | B50K | B50k | 16mm right-angle PCB mount pot | |
| FUZZ | B10K | B10k | 16mm right-angle PCB mount pot | |
Other boards based on the Electro-Harmonix Ripped Speaker Fuzz
- Electro Harmonix Ripped Speaker Fuzz Dirtbox Layouts
- Supreme Fart Machine Sheepylove · €10.00