125B · 5 knobs
PedalPCB· PCB360
Underminer Sub-Octave Synthesizer
Based on the Seppuku Sub Octave Synth· 1 other board clones it
- Category
- Fuzz· OD / Distortion / Fuzz
- Price
- $10.00in stock
- Tags
- 125B
From the vendor
Controls
• Volume
• Filter
• Blend
• Glitch (Toggle switch)
• 2-Down (Toggle switch)
Details
• Designed for a 125B enclosure with top-mounted jacks
The company, product and service names used in this web site are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners. This product is not licensed, manufactured, or distributed by Seppuku FX, maker of the Seppuku Sub-Octave Synth.
PedalPCB is not affiliated with Seppuku FX.
Schematic
The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 32 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 11 | ||||
| R1 | 6K8 | 6.8k | Resistor, 1/4W | |
| R2 | 1M | 1M | Resistor, 1/4W | |
| R3 | 470R | 470 | Resistor, 1/4W | |
| R4 | 5K6 | 5.6k | Resistor, 1/4W | |
| R5 | 1M | 1M | Resistor, 1/4W | |
| R6 | 1K | 1k | Resistor, 1/4W | |
| R7 | 3K9 | 3.9k | Resistor, 1/4W | |
| R8 | 39K | 39k | Resistor, 1/4W | |
| R9 | 39K | 39k | Resistor, 1/4W | |
| R10 | 1M | 1M | Resistor, 1/4W | |
| R100 | 4K7 | 4.7k | Resistor, 1/4W | |
| Capacitors 12 | ||||
| C1 | 10n | 10n | Film capacitor, 7.2 x 2.5mm | |
| C2 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C3 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C4 | 47u | 47u | Electrolytic capacitor, 5mm | |
| C5 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C6 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C7 | 470n | 470n | Film capacitor, 7.2 x 5.0mm | |
| C8 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C9 | 3n3 | 3.3n | Film capacitor, 7.2 x 2.5mm | |
| C10 | 10n | 10n | Film capacitor, 7.2 x 2.5mm | |
| C11 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C100 | 100u | 100u | Electrolytic capacitor, 5mm | |
| Diodes 1 | ||||
| D100 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| Transistors 2 | ||||
| Q1 | 2N5088 | 2N5088 | BJT transistor, NPN | TO-92 |
| Q2 | MPSA14 | MPSA14 | BJT darlington transistor, NPN | TO-92 |
| ICs 1 | ||||
| IC1 | CD4046 | CD4046 | Phase Locked Loop IC (PLL) | DIP16 |
| Potentiometers 3 | ||||
| VOLUME | A100K | A100k | 16mm right-angle PCB mount pot | 100K, Audio Taper (A) |
| FILTER | B100K | B100k | 16mm right-angle PCB mount pot | 100K, Linear Taper (B) |
| BLEND | B50K | B50k | 16mm right-angle PCB mount pot | 50K, Linear Taper (B) |
| Switches 2 | ||||
| GLITCH | ON/ON | ON/ON | Toggle switch, SPDT | 2-position (ON/ON) |
| 2DOWN | ON/ON | ON/ON | Toggle switch, SPDT | 2-position (ON/ON) |
Other boards based on the Seppuku Sub Octave Synth
- Seppuku Fx Sub Octave Synth Dirtbox Layouts