125B · 6 knobs
PedalPCB· PCB330
Mouton Fuzz
Based on the Fender The Pelt Fuzz· 1 other board clones it
- Category
- Fuzz· OD / Distortion / Fuzz
- Price
- $12.00in stock
- Tags
- 125B
From the vendor
Controls
• Volume
• Fuzz
• Tone
• Bloom
• Mid (Toggle switch)
• Fat (Toggle switch)
Details
• Designed for a 125B enclosure with top-mounted jacks
The company, product and service names used in this web site are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners. This product is not licensed, manufactured, or distributed by Fender Musical Instruments Corporation, maker of the Fender Pelt Fuzz.
PedalPCB is not affiliated with Fender Musical Instruments Corporation.
Schematic
The schematic is in the vendor's build document, page 4. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 54 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 22 | ||||
| R1 | 1M | 1M | Resistor, 1/4W | |
| R2 | 1M | 1M | Resistor, 1/4W | |
| R3 | 10K | 10k | Resistor, 1/4W | |
| R4 | 10K | 10k | Resistor, 1/4W | |
| R5 | 1M | 1M | Resistor, 1/4W | |
| R6 | 100K | 100k | Resistor, 1/4W | |
| R7 | 1M | 1M | Resistor, 1/4W | |
| R8 | 220K | 220k | Resistor, 1/4W | |
| R9 | 62K | 62k | Resistor, 1/4W | |
| R10 | 100K | 100k | Resistor, 1/4W | |
| R11 | 100K | 100k | Resistor, 1/4W | |
| R12 | 1K2 | 1.2k | Resistor, 1/4W | |
| R13 | 3K3 | 3.3k | Resistor, 1/4W | |
| R14 | 2K4 | 2.4k | Resistor, 1/4W | |
| R15 | 220K | 220k | Resistor, 1/4W | |
| R16 | 6K8 | 6.8k | Resistor, 1/4W | |
| R17 | 1K8 | 1.8k | Resistor, 1/4W | |
| R18 | 330R | 330 | Resistor, 1/4W | |
| R19 | 3K3 | 3.3k | Resistor, 1/4W | |
| R100 | 22K | 22k | Resistor, 1/4W | |
| R101 | 22K | 22k | Resistor, 1/4W | |
| R102 | 4K7 | 4.7k | Resistor, 1/4W | |
| Capacitors 16 | ||||
| C1 | 220p | 220p | Ceramic capacitor | |
| C2 | 33n | 33n | Film capacitor, 7.2 x 2.5mm | |
| C3 | 1u | 1u | Electrolytic capacitor, 5mm | |
| C4 | 10n | 10n | Film capacitor, 7.2 x 2.5mm | |
| C5 | 10n | 10n | Film capacitor, 7.2 x 2.5mm | |
| C6 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C7 | 220p | 220p | Ceramic capacitor | |
| C8 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C9 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C10 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C11 | 15n | 15n | Film capacitor, 7.2 x 2.5mm | |
| C12 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C13 | 10n | 10n | Film capacitor, 7.2 x 2.5mm | |
| C14 | 2u2 | 2.2u | Electrolytic capacitor, 5mm | |
| C100 | 100u | 100u | Electrolytic capacitor, 5mm | |
| C101 | 47u | 47u | Electrolytic capacitor, 5mm | |
| Diodes 5 | ||||
| D1 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D2 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D3 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D4 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D100 | 1N5817 | 1N5817 | Schottky diode, DO-41 | of 2) |
| Transistors 3 | ||||
| Q1 | J201 | J201 | N-Channel JFET | |
| Q2 | 2N4401 | 2N4401 | BJT transistor, NPN TO-92 | |
| Q3 | 2N4401 | 2N4401 | BJT transistor, NPN TO-92 | |
| ICs 2 | ||||
| IC1 | NE5532 | NE5532 | Dual op-amp, DIP8 | |
| IC2 | NE5532 | NE5532 | Dual op-amp, DIP8 | |
| Potentiometers 4 | ||||
| TONE | C10K | C10k | 16mm right-angle PCB mount pot | |
| BLOOM | B100K | B100k | 16mm right-angle PCB mount pot | |
| LEVEL | A10K | A10k | 16mm right-angle PCB mount pot | |
| FUZZ | A10K | A10k | 16mm right-angle PCB mount pot | |
| Switches 2 | ||||
| MID | ON/OFF/ON | ON/OFF/ON | SPDT toggle switch | |
| THICK | ON/ON | ON/ON | SPDT toggle switch | |
Other boards based on the Fender The Pelt Fuzz
- Fender The Pelt Fuzz Dirtbox Layouts