125B · 2 knobs
From the vendor
Controls
• Volume – Controls the output volume
• High-Gain (toggle switch) – Increases gain
• Treble Cut (toggle switch) – Reduces treble
Details
• Onboard Voltage Doubler – Runs on standard 9VDC pedal power, internally steps supply voltage to 18V for increased headroom
• Designed for a 125B enclosure with top-mounted jacks
The company, product and service names used in this web site are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners. This product is not manufactured or distributed by Keeley Electronics, maker of the Keeley Katana Boost.
PedalPCB is not affiliated with Keeley Electronics.
Schematic
The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 28 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 6 | ||||
| R1 | 1M | 1M | Resistor, 1/4W | |
| R2 | 680R | 680 | Resistor, 1/4W | |
| R3 | 1M | 1M | Resistor, 1/4W | |
| R4 | 1M | 1M | Resistor, 1/4W | |
| R5 | 680R | 680 | Resistor, 1/4W | |
| R100 | 4K7 | 4.7k | Resistor, 1/4W | * LED current limiting resistor |
| Capacitors 11 | ||||
| C1 | 100p | 100p | Ceramic capacitor | |
| C2 | 220n | 220n | Film capacitor, 7.2 x 5.0mm | |
| C3 | 10u | 10u | Electrolytic capacitor, 5mm | |
| C4 | 220n | 220n | Film capacitor, 7.2 x 5.0mm | |
| C5 | 15n | 15n | Film capacitor, 7.2 x 2.5mm | |
| C6 | 220n | 220n | Film capacitor, 7.2 x 5.0mm | |
| C7 | 1n | 1n | Film capacitor, 7.2 x 2.5mm | |
| C8 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C100 | 100u | 100u | Electrolytic capacitor, 5mm | |
| C101 | 10u | 10u | Electrolytic capacitor, 5mm | |
| C102 | 10u | 10u | Electrolytic capacitor, 5mm | |
| Diodes 3 | ||||
| D100 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| D101 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| D102 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| Transistors 2 | ||||
| Q1 | 2N5458 | 2N5458 | JFET transistor, N-channel | |
| Q2 | 2N5458 | 2N5458 | JFET transistor, N-channel | |
| ICs 1 | ||||
| IC100 | TC1044SCPA | TC1044SCPA | Charge pump IC, DIP8 | |
| Potentiometers 1 | ||||
| VOLUME | B250K | B250k | 16mm right-angle PCB mount pot | |
| Trimmers 2 | ||||
| BIAS1 | 10K | 10k | Trimmer potentiometer, 3362P type | |
| BIAS2 | 10K | 10k | Trimmer potentiometer, 3362P type | |
| Switches 2 | ||||
| TREBLE | ON/ON | ON/ON | Toggle switch, SPDT | 2-position (ON/ON) |
| GAIN | ON/ON | ON/ON | Toggle switch, SPDT | 2-position (ON/ON) |
Other boards based on the Keeley Katana
- Muramasa Aion FX · 125B · $12.50
- Keeley Katana Boost V1 Dirtbox Layouts
- Keeley Katana Effects Layouts (blog) · 1590A
- Samurai Boost Five Cats Pedals · 1590A · £4.00
- Samurai Boost Fuzz Dog · 1590B · £31.20
- Wakizashi Boost JMK PCBs · 1590A · $9.00
- Samurai Sword PCB Guitar Mania · 125B · €7.90
- Keeley Katana Boost Revolution Deux
- Keeley Katana Boost Tagboard Effects
- Keeley Katana Boost Tagboard Effects
- Keeley Katana Boost Layout Rev 2 Tagboard Effects