Module8

From the vendor

The PedalPCB Module8 is an FV-1 based digital multi-modulation pedal. Select between eight digital modulation effects.

Three digital control parameters, analog dry signal path with wet/dry mix, and adjustable output volume capable of up to 6db boost.

Features

• Includes pre-programmed EEPROM

The PedalPCB Module 8 project includes the required Arachnid PCB and pre-programmed EEPROM.

• Updated mix control

Updated mix control allows 100% wet, 100% dry, and anything in between with less volume drop in the middle.

• Improved signal path for lower noise floor

Improved filtering in the digital signal path lowers the noise floor without impacting tone.

Included Algorithms

• Phaser (Rate, Depth, Regeneration)

• Flanger (Rate, Depth, Regeneration)

• Chorus (Rate, Depth, Voice 2)

• Harmonic Tremolo (Rate, Depth, Spectrum)

• Pulse Tremolo (Rate, Depth)

• Ring Modulation (Carrier #1, Mix, Carrier #2)

• Pitch Modulation (Rate, Depth)

• Auto-Filter (Rate, Depth, Low-Pass / High-Pass)

Controls

• Control 1 – Digital parameter control

• Control 2 – Digital parameter control

• Control 3 – Digital parameter control

• Mix – Adjusts the Wet/Dry mix

• Mode – Selects the active algorithm

• Volume – Controls the overall output volume

Specifications

• Designed for a 125B enclosure with top-mounted jacks

Downloads