Enclosure not stated · 4 knobs

Gunshot

Based on the Thorpy Fx Gunshot· 2 other boards clone it

Schematic

The schematic image is on the project page. Open it at PCBWay.

Check before you build · 1 value the reader of this schematic was not sure of

Ref	Value	Normalized	Type	Notes
Resistors 11
×5	10k	10k		read from the schematic by eye
×3	1k	1k		read from the schematic by eye
×2	10M	10M		read from the schematic by eye
×2	4k7	4.7k		one is the LED resistor; read from the schematic by eye
×1	5k1	5.1k		read from the schematic by eye
×1	100k	100k		read from the schematic by eye
×1	43k	43k		read from the schematic by eye
×1	820	820		read from the schematic by eye
×1	100	100		read from the schematic by eye
×1	510k	510k		read from the schematic by eye
×1	51k	51k		read from the schematic by eye
Capacitors 6
×4	100n	100n		read from the schematic by eye
×2	220n	220n		read from the schematic by eye
×2	1u	1u		read from the schematic by eye
×1	47p	47p		read from the schematic by eye
×1	100u	100u		read from the schematic by eye
×1	47u	47u		read from the schematic by eye
Diodes 3
×2	1N4148	1N4148		read from the schematic by eye
×1	1N5817	1N5817		read from the schematic by eye
×1	9V1	9V1		zener; read from the schematic by eye
Transistors 2
×1	BS170	BS170		read from the schematic by eye
×1	2N3904	2N3904		read from the schematic by eye
ICs 1
×1	OPA2134	OPA2134		two sections of one dual op amp; read from the schematic by eye
Potentiometers 4
Gain	A1M	A1M	Potentiometer	read from the schematic by eye
Tone	W20k	W20k	Potentiometer	read from the schematic by eye
Volume	A100k	A100k	Potentiometer	read from the schematic by eye
Calibre	C5k	C5k	Potentiometer	drawn as a named pot on the BS170 source; read from the schematic by eye
LEDs 1
×2	LED	LED		clipping LEDs in the gain-stage feedback; read from the schematic by eye