Enclosure not stated · 3 knobs
Suhr Riot Distortion
- Category
- Distortion
- Price
- see vendorin stock
From the vendor
The Suhr Riot is a versatile high-gain distortion pedal with the sonic characteristics and touch sensitivity of a high quality 100 watt tube amplifier. Riot will transform a clean amp into an authoritative rock tone that inspires all of your favorite riffs. The Riot features an easy to tweak layout which includes Gain, Level, Tone and a three position Voicing switch.
Schematic
The schematic image is on the project page. Open it at PCBWay.
Parts list 33 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 2 values the reader of this schematic was not sure of
- 51E diode type is a marking code, not a part number
- clipping-mode switch is only pads SW/1/2/3, not drawn
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 12 | ||||
| ×2 | 20k | 20k | read from the schematic by eye | |
| ×2 | 1k | 1k | read from the schematic by eye | |
| ×2 | 6k8 | 6.8k | read from the schematic by eye | |
| ×2 | 1M | 1M | read from the schematic by eye | |
| ×1 | 2M | 2M | read from the schematic by eye | |
| ×1 | 470k | 470k | read from the schematic by eye | |
| ×1 | 4k7 | 4.7k | read from the schematic by eye | |
| ×1 | 3k9 | 3.9k | read from the schematic by eye | |
| ×1 | 470 | 470 | read from the schematic by eye | |
| ×1 | 220 | 220 | read from the schematic by eye | |
| ×1 | 100 | 100 | read from the schematic by eye | |
| ×1 | 47 | 47 | read from the schematic by eye | |
| Capacitors 12 | ||||
| ×2 | 100p | 100p | read from the schematic by eye | |
| ×1 | 220p | 220p | read from the schematic by eye | |
| ×1 | 1n2 | 1.2n | read from the schematic by eye | |
| ×1 | 10n | 10n | drawn as 10n* (optional); read from the schematic by eye | |
| ×1 | 18n | 18n | read from the schematic by eye | |
| ×1 | 22n | 22n | read from the schematic by eye | |
| ×1 | 100n | 100n | read from the schematic by eye | |
| ×1 | 150n | 150n | read from the schematic by eye | |
| ×1 | 1u | 1u | read from the schematic by eye | |
| ×1 | 2u2 | 2.2u | electrolytic; read from the schematic by eye | |
| ×1 | 10u | 10u | electrolytic; read from the schematic by eye | |
| ×2 | 47u | 47u | electrolytic; read from the schematic by eye | |
| Diodes 3 | ||||
| ×4 | 1N34A | 1N34A | read from the schematic by eye | |
| ×2 | 51E | 51E | marking as drawn, likely an SMD diode code; read from the schematic by eye | |
| ×1 | 1N4001 | 1N4001 | read from the schematic by eye | |
| ICs 1 | ||||
| ×2 | 4580 | 4580 | four sections drawn: VB buffer, two gain stages, output buffer; read from the schematic by eye | |
| Potentiometers 3 | ||||
| Dist | B100k | B100k | Potentiometer | read from the schematic by eye |
| Tone | B25k | B25k | Potentiometer | read from the schematic by eye |
| Vol | A10k | A10k | Potentiometer | read from the schematic by eye |
| LEDs 2 | ||||
| ×2 | RED | RED | clipping LEDs; read from the schematic by eye | |
| ×1 | BLUE | BLUE | clipping LED; read from the schematic by eye | |