Enclosure not stated · 3 knobs
il diavolo overdrive
Based on the MXR il diavolo overdrive· 1 other board clones it
- Category
- Overdrive
- Price
- see vendorin stock
- Tags
- MXR, MXR, il diavolo, overdrive
Schematic
The schematic image is on the project page. Open it at PCBWay.
Parts list 26 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 10 | ||||
| ×1 | 100 | 100 | read from the schematic by eye | |
| ×1 | 160 | 160 | read from the schematic by eye | |
| ×4 | 930 | 930 | read from the schematic by eye | |
| ×1 | 1k | 1k | read from the schematic by eye | |
| ×1 | 4k7 | 4.7k | read from the schematic by eye | |
| ×1 | 7k8 | 7.8k | read from the schematic by eye | |
| ×1 | 9k3 | 9.3k | read from the schematic by eye | |
| ×6 | 10k | 10k | read from the schematic by eye | |
| ×2 | 510k | 510k | read from the schematic by eye | |
| ×1 | 1M | 1M | read from the schematic by eye | |
| Capacitors 7 | ||||
| ×1 | 51p | 51p | read from the schematic by eye | |
| ×2 | 100n | 100n | read from the schematic by eye | |
| ×3 | 220n | 220n | read from the schematic by eye | |
| ×2 | 1u | 1u | read from the schematic by eye | |
| ×1 | 10u | 10u | electrolytic; read from the schematic by eye | |
| ×1 | 47u | 47u | electrolytic; read from the schematic by eye | |
| ×1 | 100u | 100u | electrolytic; read from the schematic by eye | |
| Diodes 2 | ||||
| ×3 | 1N4148 | 1N4148 | clipping: one forward, two in series reverse (switched); read from the schematic by eye | |
| ×1 | 1N5817 | 1N5817 | reverse-polarity protection; read from the schematic by eye | |
| Transistors 1 | ||||
| ×2 | BC549C | BC549C | input and output emitter followers; read from the schematic by eye | |
| ICs 1 | ||||
| ×1 | 4558 | 4558 | dual op-amp, both sections used; read from the schematic by eye | |
| Potentiometers 3 | ||||
| Drive | A1M | A1M | Potentiometer | read from the schematic by eye |
| Tone | W20k | W20k | Potentiometer | read from the schematic by eye |
| Level | A100k | A100k | Potentiometer | read from the schematic by eye |
| Switches 1 | ||||
| HI/LOW | SPDT | SPDT | on/off/on, selects LED or silicon clipping; read from the schematic by eye | |
| LEDs 1 | ||||
| ×2 | LED | LED | anti-parallel clipping LEDs; one marked RED, the other has no colour drawn; read from the schematic by eye | |
Other boards based on the MXR il diavolo overdrive
- Mastema Overdrive PedalPCB · 125B · $12.00