Enclosure not stated · 3 knobs
Ibanez OD855 Overdrive 2
- Category
- Overdrive
- Controls
- Distortion · Tone · Level
- Price
- see vendorin stock
From the vendor
The Ibanez OD-855 Overdrive II was first made in the mid-1970s and was a precursor to the TS808 Tube Screamer. It features controls for Tone, Level, and Distortion.
!PS The distortion regulator may not be connected correctly, I have not found any schemes with the location of the direction of rotation. But tagboardeffects connected to 3 output...
Schematic
The schematic image is on the project page. Open it at PCBWay.
Parts list 27 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 2 values the reader of this schematic was not sure of
- Source image is only 600x300 px: 680 resistor (top of tone network), 20n input cap, 30p feedback cap and pot values B20k/B10k read at low resolution
- Distortion C50k marked with '?' by the drawer
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 9 | ||||
| ×7 | 10k | 10k | read from the schematic by eye | |
| ×3 | 3k | 3k | read from the schematic by eye | |
| ×2 | 510k | 510k | read from the schematic by eye | |
| ×2 | 100k | 100k | read from the schematic by eye | |
| ×1 | 680 | 680 | label low-res, could be 680 or 480; read from the schematic by eye | |
| ×1 | 470 | 470 | read from the schematic by eye | |
| ×1 | 100 | 100 | read from the schematic by eye | |
| ×1 | 47 | 47 | read from the schematic by eye | |
| ×1 | 4k7 | 4.7k | LED resistor; read from the schematic by eye | |
| Capacitors 11 | ||||
| ×2 | 1u | 1u | read from the schematic by eye | |
| ×2 | 100n | 100n | read from the schematic by eye | |
| ×1 | 20n | 20n | low-res label; read from the schematic by eye | |
| ×1 | 470p | 470p | read from the schematic by eye | |
| ×1 | 470n | 470n | read from the schematic by eye | |
| ×1 | 30p | 30p | low-res label; read from the schematic by eye | |
| ×1 | 1n | 1n | read from the schematic by eye | |
| ×1 | 4u7 | 4.7u | electrolytic; read from the schematic by eye | |
| ×1 | 10u | 10u | electrolytic; read from the schematic by eye | |
| ×1 | 100u | 100u | electrolytic; read from the schematic by eye | |
| ×1 | 47u | 47u | electrolytic; read from the schematic by eye | |
| Diodes 2 | ||||
| ×2 | 1N60 | 1N60 | clipping; read from the schematic by eye | |
| ×1 | 1N4001 | 1N4001 | read from the schematic by eye | |
| Transistors 1 | ||||
| ×2 | 2SC1815BL | 2SC1815BL | read from the schematic by eye | |
| ICs 1 | ||||
| ×1 | 4558 | 4558 | dual op-amp, both sections used; read from the schematic by eye | |
| Potentiometers 3 | ||||
| Distortion | C50k | C50k | Potentiometer | drawn with a '?' beside it on the sheet; read from the schematic by eye |
| Tone | B20k | B20k | Potentiometer | read from the schematic by eye |
| Level | B10k | B10k | Potentiometer | read from the schematic by eye |