Tv Channel, Dual Channel Overdrive

From the vendor

Project overview

The TV Channel is based around a classic hard-clipping overdrive, the DOD 250/Distortion +; the people from EQD took the base of this classic drive and took it one step further adding, making it double, and adding 3 clipping options per channel.

Introduction

This circuit has been developed by the people from Earthquaker inspired on one of the most classic and iconic overdrives, the DOD 250/Distortion+.

The concept of the TV Channel is simple yet effective. It consists of two DOD250 circuits placed on the same board, each with 3 different clipping options and a toggle to select which one to activate.

On Channel “ONE,” you can choose between the “Silicon” mode will be bright/loud/fuzzy and has a natural tube type break up. “Germanium” mode is a little looser with more lows and warmth and less output.

On Channel “TWO” LED mode is the loudest, cleanest, and most touch sensitive/least compressed. “Mosfet” mode is the most compressed with a tighter crunch, the group’s biggest hesher.

Controls

Green Controls

• Gain: Adjusts the drive, dirtier clockwise, cleaner counterclockwise

• Green: Sets the output level when the green LED is lit.

• Toggle: Silicon clipping, No clipping, Germanium Clipping

• Red Controls

• Gain: Adjusts the drive, dirtier clockwise, cleaner counterclockwise

• Red: Sets the output level when the red LED is lit.

• Toggle: LED clipping, “No clipping, Mosfet Clipping

Foot-switches

• Channel Switch: Selects between Red and Green channels

• Activate Switch: Turns the effect on and off.

For any technical questions regarding this build don’t forget to check out our Facebook Group and our forum at Free Stomp Boxes.

TV Channel 1.1v – Building Docs

TV Channel 1.0v – Building Docs

TV Channel – 1590BB Drilling Template A4