1590BB
The PiledriverBoost Pedal
From the vendor
Boost Pedal
Clean-boost pedal kit with up to 38db gain The Piledriver measures 1.35" in height, 3.70" in width and 4.70" in length.
What people are saying about The Piledriver:
"If you're a pedal lover like me, who's always wanted to try their hand at building one, but have zero experience, then this is the pedal for you." "This is a good clean boost and was easy to assemble. Fun little project and I recommend it." "This kit was so easy to build and now it's my go to cut-through-the-bologna pedal. I use it at large jam session house parties. If there's some drunko playin' too loud, I stomp on this to cut through that bologna!"
Schematic
The schematic is in the vendor's build document. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 9 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 3 | ||||
| ×1 | 5.1k | 5.1k | Resistor, 1/2W | from the kit's parts list (R-A5D1K) |
| ×1 | 100k | 100k | Resistor, 1/2W | from the kit's parts list (R-A100K) |
| ×2 | 1M | 1M | Resistor, 1/2W | from the kit's parts list (R-A1M) |
| Capacitors 2 | ||||
| ×1 | 0.1uF | 100n | Capacitor, 400V | from the kit's parts list (C-TD1-400) |
| ×1 | 10uF | 10u | Electrolytic capacitor, 50V | from the kit's parts list (C-ET10-50) |
| Diodes 1 | ||||
| ×2 | 1N4005 | 1N4005 | Solid state diode | from the kit's parts list (P-Q1N4005) |
| Transistors 1 | ||||
| ×1 | BS170 | BS170 | N-Channel MOSFET | from the kit's parts list (P-QBS170) |
| Potentiometers 1 | ||||
| ×1 | B5k | B5k | Potentiometer | from the kit's parts list (R-VA5KL) |
| Switches 1 | ||||
| ×1 | DPDT | DPDT | DPDT Foot Switch | from the kit's parts list (P-H498) |