Enclosure not stated · 3 knobs
Killer Bee New v4
Based on the Honey Bee style but with modern enhancements!
- Category
- Overdrive
- Price
- $8.95out of stock
From the vendor
Based on the Honey Bee style but with modern enhancements!
Description
The Killer Bee is based on the Honey Bee but with some modern features. Use this in front of a slightly overdriven tube amp and push your amp into distortion, or run it in tandem with other dirt pedals. It contains all of the “honey dripping” sound you would expect, but what makes our version “Killer” is the addition of a switchable boost for more sustain and volume. This could not be achieved using a similar circuit.
Simply a must have for any pedal board!
Killer Bee Build Document
Schematic
The schematic is in the vendor's build document, page 2. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 52 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 22 | ||||
| R1 | 1M | 1M | ||
| R16 | 33k | 33k | ||
| R2 | 360k | 360k | ||
| R17 | 1M | 1M | ||
| R3 | 15k | 15k | ||
| R18 | 1k | 1k | ||
| R4 | 3k | 3k | ||
| R19 | 100R | 100 | ||
| R5 | 1k | 1k | ||
| R20 | 47k | 47k | ||
| R6 | 1k | 1k | ||
| R21 | 47k | 47k | ||
| R7 | 27k | 27k | ||
| R22 | 1k8 | 1.8k | ||
| R8 | 10k | 10k | ||
| R9 | 150k | 150k | ||
| R10 | 1M | 1M | ||
| R11 | 5k6 | 5.6k | ||
| R12 | 2k2 | 2.2k | ||
| R13 | 47k | 47k | ||
| R14 | 33k | 33k | ||
| R15 | 68k | 68k | ||
| Capacitors 16 | ||||
| C8 | 10n | 10n | ||
| C9 | 22n | 22n | ||
| C10 | 100n | 100n | ||
| C11 | 1u | 1u | ||
| C12 | 4n7 | 4.7n | ||
| C13 | 100n | 100n | ||
| C14 | 100u | 100u | ||
| C15 | 22u | 22u | ||
| C1 | 47n | 47n | ||
| C16 | 22u | 22u | ||
| C2 | 100p | 100p | ||
| C3 | 220n | 220n | ||
| C4 | 2u2 | 2.2u | ||
| C5 | 1u | 1u | ||
| C6 | 4n7 | 4.7n | ||
| C7 | 22n | 22n | ||
| Diodes 3 | ||||
| D3 | 1n4001 | 1N4001 | ||
| D4 | 1n4001 | 1N4001 | ||
| D5 | 1N5817 | 1N5817 | ||
| Transistors 2 | ||||
| Q1 | 2N5457 | 2N5457 | ||
| Q2 | J113 | J113 | see the build notes | |
| ICs 1 | ||||
| IC1 | TL071 | TL071 | see the build notes | |
| Potentiometers 3 | ||||
| VOL | A100K | A100k | Potentiometer | |
| Drive | B500K | B500k | Potentiometer | |
| Tone | B50K | B50k | Potentiometer | |
| Trimmers 1 | ||||
| Bias | 20K | 20k | Trimmer | |
| Switches 1 | ||||
| Switch | DPDT | DPDT | Switch | see the build notes |
| LEDs 3 | ||||
| D1 | LED | LED | ||
| D2 | LED | LED | ||
| D6 | Status LED | STATUS LED | ||