Enclosure not stated · 2 knobs
From the vendor
The Fuzzstortion is the best EQD Bellows style PCB.
Description
The Fuzzstortion is a Hybrid Fuzz with smooth tube style breakup. Based on the EQD Bellows.
This Guitar Volume sensitive circuit achieves tube amp-style breakup to Fuzzy Saturation. In between, you’ll find an array of useful overdrive and distortion tones to play with. No need for a tone control as it delivers the full frequency provided by your rig.
Fuzzstortion Build Document
Schematic
The schematic is in the vendor's build document, page 2. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 18 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 6 | ||||
| R1 | 10k | 10k | ||
| R2 | 10k | 10k | ||
| R3 | 22k | 22k | ||
| R4 | 200R | 200 | ||
| R5 | 1k8 | 1.8k | ||
| R6 | 100R | 100 | ||
| Capacitors 6 | ||||
| C1 | 22n | 22n | ||
| C2 | 1n | 1n | ||
| C3 | 100u | 100u | ||
| C4 | 68n | 68n | ||
| C5 | 100n | 100n | ||
| C6 | 100u | 100u | ||
| Diodes 1 | ||||
| D1 | 1N5817 | 1N5817 | ||
| Transistors 2 | ||||
| Q1 | J113 or PF5102 | J113 / PF5102 | ||
| Q2 | MPSA13 | MPSA13 | ||
| Potentiometers 2 | ||||
| VOL | A100k | A100k | Potentiometer | |
| Gain | B250K | B250k | Potentiometer | |
| LEDs 1 | ||||
| D2 | Status LED | STATUS LED | ||