Enclosure not stated

Easy Order Switching PCB

Category: Utility
Price: $0.49out of stock

From the vendor

A small order switching PCB allowing you to change the order of two circuits, within a single enclosure.

Description

New v2022 order switching PCB features slotted foot switch pads for quick soldering.

A very small switching circuit that allows you to change the order of two circuits, within a single enclosure that also includes pads for an on-board Bi-color or Standard LED for easy order indication.

Board Dimensions only (W x H) 1.43” x 1.13” ca. 36.2 mm x 28.6mm

Switching is achieved via a standard (affordable) 4PDT On-On Solder Lug toggle switch .

There are many uses for the Easy Order Switching board.

For example:

• Switch the order of the overdrive circuits and use in tandem!

• Set the Boost to follow the Overdrive or cascade into it.

• With a Boost following an Overdrive you get an increase in Volume.

• With a Boost preceding the Overdrive you get an increase in Distortion!

Starting to see the potential? Make your build stand out in the crowd and go boutique.

You are only limited by your imagination.

We also carry a 3PDT Toggle Switch version with no on-board LED circuitry.

Easy Order Switching Board – 4PDT Footswitch/LED Build Document

Schematic

The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.

Parts list 5 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

Ref	Value	Normalized	Notes
Resistors 1
R1	1k8	1.8k	CLR; BOM says 1k8 to 4k, schematic prints 1k8; read from the schematic by eye
Switches 1
SW1	4PDT	4PDT	footswitch carried on the board; swaps FX1/FX2 order; read from the schematic by eye
LEDs 3
D1	CA Bi-colour LED	CA BI-COLOUR LED	common anode; use D1 or DA/DB; read from the schematic by eye
DA	LED	LED	alternative to D1; read from the schematic by eye
DB	LED	LED	alternative to D1; read from the schematic by eye