Enclosure not stated · 4 knobs
Add
- Category
- Reverb
- Controls
- Reverb · Tone · Vol · Decay
- Price
- $8.95out of stock
From the vendor
Add-verb from slap back-style delay to natural room reverb and far beyond!
Description
For a modern version try the NostalgiTone Spring Reverb w/ on-board Volume Trimmer
Add-verb features the BTDR-3 Reverb Brick, this circuit allows you to add quality reverb to any amplifier at the stomp of a switch.
Considering the superb effect from a simple circuit, everyone at GuitarPCB agreed this is a real winner!
The four controls are: Volume, Reverb, Tone and Decay. Everything needed for perfect reverb tone!
ADD-VERB – Build Document
Schematic
The schematic is in the vendor's build document, page 2. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 28 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 12 | ||||
| R1 | 1M | 1M | OCR | |
| R12 | 1k8 | 1.8k | OCR | |
| R2 | 27k | 27k | OCR | |
| R3 | 200k | 200k | OCR | |
| R4 | 4k7 | 4.7k | OCR | |
| R5 | 20k | 20k | OCR | |
| R6 | 22k | 22k | OCR | |
| R7 | 6k8 | 6.8k | OCR | |
| R8 | 1k | 1k | OCR | |
| R9 | 1M | 1M | OCR | |
| R10 | 1k8 | 1.8k | OCR | |
| R11 | 1k8 | 1.8k | OCR | |
| Capacitors 9 | ||||
| C1 | 22n | 22n | OCR | |
| C2 | 50p | 50p | OCR | |
| C3 | 220n | 220n | OCR | |
| C4 | 1u | 1u | OCR | |
| C5 | 100p | 100p | OCR | |
| C6 | 1u | 1u | OCR | |
| C7 | 100u | 100u | OCR | |
| C8 | 47u | 47u | OCR | |
| C9 | 47u | 47u | OCR | |
| Diodes 1 | ||||
| D1 | 1N5817 | 1N5817 | OCR | |
| ICs 2 | ||||
| IC1 | TL072 | TL072 | OCR | |
| IC2 | 78L05 | 78L05 | OCR | |
| Potentiometers 4 | ||||
| REVERB | B50K | B50k | Potentiometer | OCR |
| TONE | B5K | B5k | Potentiometer | OCR |
| VOL | B10K | B10k | Potentiometer | OCR |
| DECAY | B100K | B100k | Potentiometer | OCR |