Enclosure not stated
Signal Splitter
- Category
- Utility
- Price
- €6.25in stock
From the vendor
The signal splitter is a device that enables simultaneous connection of two amplifiers or splitting the signal into two paths. Volume control and the ability to reverse the phase in one channel allows you to perfectly match the signal to your current needs.
PCB. Dimensions: 44mm x 43mm.
Files to download:
•
Signal splitter ENG.pdf
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 32 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 16 | ||||
| R12 | 82k | 82k | ||
| R16 | 82k | 82k | ||
| R11 | 15k | 15k | ||
| R15 | 15k | 15k | ||
| R1 | 20k | 20k | ||
| R2 | 20k | 20k | ||
| R10 | 33k | 33k | ||
| R13 | 33k | 33k | ||
| R4 | 47k | 47k | ||
| R5 | 47k | 47k | ||
| R7 | 47k | 47k | ||
| R8 | 47k | 47k | ||
| R9 | 47k | 47k | ||
| R3 | 1M | 1M | ||
| R6 | 1M | 1M | ||
| R14 | 1M | 1M | ||
| Capacitors 11 | ||||
| C8 | 47p | 47p | ||
| C9 | 47p | 47p | ||
| C10 | 47p | 47p | ||
| C11 | 47p | 47p | ||
| C3 | 100n | 100n | ||
| C4 | 10u | 10u | ||
| C5 | 10u | 10u | ||
| C6 | 10u | 10u | ||
| C7 | 10u | 10u | ||
| C2 | 22u | 22u | ||
| C1 | 100u | 100u | ||
| Diodes 1 | ||||
| D1 | 1N5819 | 1N5819 | ||
| ICs 2 | ||||
| U1 | TL072 | TL072 | ||
| U2 | TL072 | TL072 | ||
| Potentiometers 2 | ||||
| RV1 | B50k | B50k | ||
| RV2 | B50k | B50k | ||