Enclosure not stated
Hi Cut Filter / LPF
- Category
- Utility
- Price
- €6.25in stock
From the vendor
The Hi Cut Filter is a tunable low-pass filter that lets you cut the highest tones at the point of your choosing. It helps in controlling the treble, especially in hi-gain distortion and amplifiers, where there is a problem with the screaming treble. Thanks to the Hi Cut Filter, we can increase the amount of treble in the preamplifier by adding a lot of harmonics and then cut the band from the top, getting rid of the sharp highest frequencies.
PCB. Dimensions: 53mm x 32mm
Files to download:
•
Low Pass Filter ENG.pdf
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 28 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 14 | ||||
| R11 | 1k | 1k | ||
| R4 | 3k3 | 3.3k | ||
| R5 | 3k3 | 3.3k | ||
| R10 | 4k7 | 4.7k | ||
| R2 | 10k | 10k | ||
| R7 | 10k | 10k | ||
| R13 | 10k | 10k | ||
| R14 | 10k | 10k | ||
| R9 | 20k | 20k | ||
| R6 | 22k | 22k | ||
| R12 | 82k | 82k | ||
| R3 | 510k | 510k | ||
| R8 | 510k | 510k | ||
| R1 | 1M | 1M | ||
| Capacitors 9 | ||||
| C5 | 100p | 100p | ||
| C3 | 10n | 10n | ||
| C4 | 10n | 10n | ||
| C1 | 47n | 47n | ||
| C2 | 10u | 10u | ||
| C6 | 10u | 10u | ||
| C7 | 10u | 10u | ||
| C9 | 22u | 22u | ||
| C8 | 47u | 47u | ||
| Diodes 1 | ||||
| D1 | 1N400X | 1N400X | ||
| ICs 1 | ||||
| U1 | LF353 | LF353 | ||
| Potentiometers 3 | ||||
| RV1 | 2C50k | 2C50K | ||
| RV2 | 2C50k | 2C50K | ||
| RV3 | A50k | A50k | ||