Enclosure not stated · 2 knobs
WHRL
Based on the Way Huge Red Llama Overdrive
- Category
- Distortion
- Controls
- Drive · Volume
- Price
- $10.00in stock
- Tags
- Bill of Materials
From the vendor
The ready-to-solder PCB for Way Huge Red Llama Overdrive Replica. The PCB dimensions are 4.2cm by 2.9cm. PCB has solder mask, plate-through holes and screen print for placement of components.
Click here for complete instructions for this PCB.
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 14 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 5 | ||||
| R1 | 100k | 100k | ||
| R2 | 100k | 100k | ||
| R3 | 1M | 1M | ||
| R4 | 1k | 1k | ||
| R5 | 1k | 1k | ||
| Capacitors 6 | ||||
| C1 | 0.068ųF | 68n | ||
| C2 | 51pF | 51p | ||
| C3 | 0.033ųF | 33n | ||
| C4 | 330ųF | 330u | ||
| C5 | 100pF | 100p | ||
| C6 | 10ųF | 10u | ||
| ICs 1 | ||||
| IC1 | 4049UBN | 4049UBN | ||
| Potentiometers 2 | ||||
| DRIVE | B1M | B1M | Potentiometer | |
| VOLUME | A10k | A10k | Potentiometer | |