Enclosure not stated
Regulated Power Supply
- Category
- Utility· Power Supplies
- Price
- $10.00in stock
From the vendor
The ready-to-solder PCB for a Regulated Power Supply. The PCB dimensions are 2.9cm by 2.8cm and has solder mask, plate-through holes and screen print for placement of components. The transformer does not mount on the PCB. PCB has room for a standard heat sink on the regulator. Also accommodates either a diode bridge package or 4 separate diodes for the rectification.
Click here for complete instructions for this PCB.
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 7 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Capacitors 2 | ||||
| C1 | 220ųF | 220u | ||
| C2 | 100ųF | 100u | ||
| Diodes 4 | ||||
| D1 | 1N4001 | 1N4001 | ||
| D2 | 1N4001 | 1N4001 | ||
| D3 | 1N4001 | 1N4001 | ||
| D4 | 1N4001 | 1N4001 | ||
| Transistors 1 | ||||
| Q1 | 7809 | 7809 | ||