Enclosure not stated
Red Ranger Booster
- Category
- Boost· Boosters
- Price
- $12.00in stock
From the vendor
The ready-to-solder PCB for Dan Armstrong Red Ranger Booster Replica. The PCB dimensions are 5.7cm by 2.8cm.
The Red Ranger is an excellent clean boost that also has Treble and Bass boost modes. On of the best clean boosters ever!
Click here for complete instructions for this PCB for Red Ranger Booster.
Trademarks mentioned here belong to their owner, not General Guitar Gadgets
Schematic
The schematic is in the vendor's build document. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 24 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 14 | ||||
| R1 | 220k | 220k | ||
| R2 | 220k | 220k | ||
| R3 | 3k | 3k | ||
| R4 | 10k | 10k | ||
| R5 | 47 | 47 | ||
| R6 | 8k2 | 8.2k | ||
| R7 | 6k8 | 6.8k | ||
| R8 | 10k | 10k | ||
| R9 | 27k | 27k | ||
| R10 | 100k | 100k | ||
| R11 | 100k | 100k | ||
| R12 | 1M5 | 1.5M | ||
| R13 | 1M5 | 1.5M | ||
| R14 | 1k | 1k | ||
| Capacitors 7 | ||||
| C1 | 0.047ųF | 47n | ||
| C2 | 10pF | 10p | ||
| C3 | 4.7ųF | 4.7u | ||
| C4 | 0.01uF | 10n | ||
| C5 | 4.7ųF | 4.7u | ||
| C6 | 10pF | 10p | ||
| C7 | 100ųF | 100u | ||
| Transistors 3 | ||||
| Q1 | 2N5088 or 2N5089 | 2N5088 OR 2N5089 | ||
| Q2 | 2N5088 or 2N5089 | 2N5088 OR 2N5089 | ||
| Q3 | 2N5087 | 2N5087 | ||