Enclosure not stated · 3 knobs
Oc Distortion
- Category
- Distortion
- Controls
- Drive · Tone · Volume
- Price
- $13.00in stock
From the vendor
The RTS (ready-to-solder) Printed Circuit Board for Overdrive Crunch Distortion. The PCB dimensions are 5.5cm by 3.3cm. PCB has solder mask, plate-through holes and screen print for placement of components. Jumpers are included in the top layer, so there is no need to solder in any jumpers. Click here for complete instructions for this PCB.
Any trademarks mentioned here belong to their rightful owners and do not belong to General Guitar Gadgets.
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 32 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 14 | ||||
| R1 | 10k | 10k | ||
| R2 | 1M | 1M | ||
| R3 | 470k | 470k | ||
| R4 | 18k | 18k | ||
| R6 | 2k2 | 2.2k | ||
| R7 | 10k | 10k | ||
| R8 | 10k | 10k | ||
| R9 | 150k | 150k | ||
| R10 | 39k | 39k | ||
| R11 | 22k | 22k | ||
| R12 | 33k | 33k | ||
| R13 | 10k | 10k | ||
| R14 | 10k | 10k | ||
| R17 | 1k | 1k | ||
| Capacitors 11 | ||||
| C1 | 0.022ųF | 22n | ||
| C2 | 220pF | 220p | ||
| C3 | 0.068ųF | 68n | ||
| C4 | 0.001ųF | 1n | ||
| C5 | 220pF | 220p | ||
| C6 | 0.1ųF | 100n | ||
| C7 | 1ųF | 1u | ||
| C8 | 0.047ųF | 47n | ||
| C9 | 100ųF | 100u | ||
| C10 | 0.1ųF | 100n | ||
| C11 | 22ųF | 22u | ||
| Diodes 1 | ||||
| D1 | 1N914 | 1N914 | ||
| Transistors 2 | ||||
| Q1 | 2N7000 | 2N7000 | ||
| Q2 | 2N7000 | 2N7000 | ||
| ICs 1 | ||||
| IC1 | TL082 | TL082 | ||
| Potentiometers 3 | ||||
| DRIVE | B1M | B1M | Potentiometer | |
| TONE | B10k | B10k | Potentiometer | |
| VOLUME | A500k | A500k | Potentiometer | |