Enclosure not stated · 1 knobs
DIST
Based on the MXR Distortion Plus· 1 other board clones it
- Category
- Distortion
- Controls
- Gain
- Price
- $11.00in stock
- Tags
- Bill of Materials
From the vendor
The RTS (ready-to-solder) Printed Circuit Board for the DOD250 Overdrive or the MXR(TM) Distortion+. The PCB dimensions are 5.4cm by 3.2cm. PCB has solder mask, plate-through holes and screen print for placement of components. Jumpers are included in the top layer, so there is no need to solder in any jumpers.
The following distortion effects can be built with this PCB:
• MXR Distortion Plus
• DOD 250 Overdrive
• '77 Gray 250 Overdrive
• Ross Distortion
Click any of the above links for complete instructions for this PCB.
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 23 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 10 | ||||
| R1 | 1M5 | 1.5M | ||
| R2 | 1M | 1M | ||
| R3 | 1M | 1M | ||
| R4 | 1M | 1M | ||
| R5 | 10k | 10k | ||
| R6 | 4k7 | 4.7k | ||
| R8 | 1M | 1M | ||
| R9 | 10k | 10k | ||
| R10 | 100k | 100k | ||
| R11 | 1k | 1k | ||
| Capacitors 7 | ||||
| C1 | 1ųF | 1u | ||
| C2 | 0.01ųF | 10n | ||
| C3 | 0.001ųF | 1n | ||
| C4 | 0.047ųF | 47n | ||
| C5 | 10pF | 10p | ||
| C6 | 4.7ųF | 4.7u | ||
| C7 | 0.001ųF | 1n | ||
| Diodes 4 | ||||
| D1 | 1N914 | 1N914 | ||
| D2 | 1N914 | 1N914 | ||
| D4 | Status | STATUS | ||
| D8 | (optional) | (OPTIONAL) | ||
| ICs 1 | ||||
| IC1 | JRC741 | JRC741 | ||
| Potentiometers 1 | ||||
| GAIN | C500k | C500k | Potentiometer | |
Other boards based on the MXR Distortion Plus
- MXR Distortion Plus Experimentalists Anonymous