Enclosure not stated · 3 knobs
MBB
Based on the Marshall Vintage BlueBreaker
- Category
- Distortion
- Controls
- Gain · Tone · Volume
- Price
- $14.00in stock
- Tags
- Bill of Materials
From the vendor
The ready-to-solder PCB for Marshall(TM) Blues Breaker(TM) Replica. The PCB dimensions are 5.5cm by 4.0cm. PCB has solder mask, plate-through holes and screen print for placement of components.
Click here for complete instructions for this PCB.
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 32 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 12 | ||||
| R1 | 1M5 | 1.5M | ||
| R2 | 4k7 | 4.7k | ||
| R3 | 3k3 | 3.3k | ||
| R4 | 1M | 1M | ||
| R5 | 47k | 47k | ||
| R8 | 10k | 10k | ||
| R9 | 1k | 1k | ||
| R10 | 220k | 220k | ||
| R11 | 6k8 | 6.8k | ||
| R12 | 6k8 | 6.8k | ||
| R14 | 47k | 47k | ||
| R18 | 1k | 1k | ||
| Capacitors 10 | ||||
| C1 | 0.01ųF | 10n | ||
| C2 | 0.01ųF | 10n | ||
| C3 | 0.01ųF | 10n | ||
| C4 | 47pF | 47p | ||
| C5 | 47ųF | 47u | ||
| C6 | 0.1ųF | 100n | ||
| C8 | 0.01ųF | 10n | ||
| C9 | 0.01ųF | 10n | ||
| C10 | 0.1ųF | 100n | ||
| C11 | 100ųF | 100u | ||
| Diodes 5 | ||||
| D2 | 1N914 | 1N914 | ||
| D3 | 1N914 | 1N914 | ||
| D4 | 1N914 | 1N914 | ||
| D5 | 1N914 | 1N914 | ||
| D1 | 1N4001 or 1N914 | 1N4001 OR 1N914 | ||
| ICs 1 | ||||
| IC1 | TL072 | TL072 | ||
| Potentiometers 3 | ||||
| GAIN | B100k | B100k | Potentiometer | |
| TONE | B25k | B25k | Potentiometer | |
| VOLUME | A100k | A100k | Potentiometer | |
| LEDs 1 | ||||
| D6 | LED | LED | ||