Enclosure not stated
Dual IC Buffer
- Category
- Utility· Switchers & Routers
- Price
- $9.00no longer listed
No longer listed General Guitar Gadgets stopped listing this boardafter 2026-10-11. It stays here for reference; the vendor page and build document links may no longer work.
From the vendor
The RTS (ready-to-solder) PCB for 2 IC Powered Buffers. The PCB dimensions are 3.6cm by 2.1cm. PCB has solder mask, plate-through holes and screen print for placement of components. Jumpers are included in the top layer, so there is no need to solder in any jumpers.
Click here for complete instructions for A Dual Buffer using this PCB.
Click here for complete instructions for An Active A/B/Y Switch Box using this PCB.
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 8 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 4 | ||||
| R1 | 2M2 | 2.2M | ||
| R2 | 2M2 | 2.2M | ||
| R3 | 1k | 1k | ||
| R4 | 2M2 | 2.2M | ||
| Capacitors 2 | ||||
| C1 | 0.1ųF | 100n | ||
| C2 | 10ųF | 10u | ||
| ICs 1 | ||||
| IC1 | TL071 | TL071 | ||
| LEDs 1 | ||||
| D2 | LED | LED | ||