Enclosure not stated
Dual IC Buffer
- Category
- Utility
- Price
- $8.00in stock
- Tags
- Add-On
From the vendor
The RTS (ready-to-solder) PCB for 2 IC Powered Buffers. The PCB dimensions are 3.6cm by 2.1cm. PCB has solder mask, plate-through holes and screen print for placement of components. Jumpers are included in the top layer, so there is no need to solder in any jumpers.
Click here for complete instructions for A Dual Buffer using this PCB.
Click here for complete instructions for An Active A/B/Y Switch Box using this PCB.
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 9 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 4 | ||||
| R1 | 2M2 | 2.2M | ||
| R2 | 2M2 | 2.2M | ||
| R3 | 1k | 1k | ||
| R4 | 2M2 | 2.2M | ||
| Capacitors 2 | ||||
| C1 | 0.1ųF | 100n | ||
| C2 | 10ųF | 10u | ||
| Diodes 1 | ||||
| D1 | (optional) | (OPTIONAL) | ||
| ICs 1 | ||||
| IC1 | TL071 | TL071 | ||
| LEDs 1 | ||||
| D2 | LED | LED | ||