Enclosure not stated
Digital Reverb
- Category
- Reverb
- Price
- $13.00in stock
From the vendor
The ready-to-solder PCB for the Digial Reverb. PCB size is 3.3CM by 5.2 cm. PCB has solder mask, plate-through holes and screen print for placement of components. Jumpers are included in the top layer, so there is no need to solder in any jumpers.
Click here for complete instructions for this PCB.
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 23 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 14 | ||||
| R1 | 1M | 1M | ||
| R2 | 10k | 10k | ||
| R3 | 10k | 10k | ||
| R4 | 33k | 33k | ||
| R5 | 10k | 10k | ||
| R6 | 22k | 22k | ||
| R7 | 39k | 39k | ||
| R8 | 10k | 10k | ||
| R9 | 10k | 10k | ||
| R10 | 39k | 39k | ||
| R11 | 470 | 470 | ||
| R12 | 100k | 100k | ||
| R13 | 10k | 10k | ||
| R14 | 1k | 1k | ||
| Capacitors 5 | ||||
| C1 | 0.1ųF | 100n | ||
| C2 | 0.022ųF | 22n | ||
| C3 | 47ųF | 47u | ||
| C4 | 10ųF | 10u | ||
| C5 | 47ųF | 47u | ||
| Diodes 1 | ||||
| D1 | BAT | BAT | ||
| ICs 2 | ||||
| IC1 | TL072 | TL072 | ||
| IC2 | TL072 | TL072 | ||
| LEDs 1 | ||||
| D2 | LED | LED | ||