Enclosure not stated · 3 knobs
Colorsound Bass Fuzz
Based on the Colorsound Bass Fuzz
- Category
- Bass· Bass Effects
- Controls
- Fuzz · Tone · Volume
- Price
- $14.00in stock
From the vendor
The RTS (ready-to-solder) Print Circuit Board for ColorSound Bass Fuzz.. Dimensions: 5.7cm x 3.9cm. PCB has solder mask, plate-through holes and screen print for placement of components. Note: this is the same RTS PCB used for the ColorSound Supa ToneBender and the ColorSound Jumbo ToneBender, but the component placement is for the Bass Fuzz since it is similar to the Jumbo ToneBender.
Click here for complete instructions for this PCB.
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 37 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 20 | ||||
| R2 | 100k | 100k | ||
| R3 | 470k | 470k | ||
| R4 | 100 | 100 | ||
| R5 | 15k | 15k | ||
| R7 | 1k | 1k | ||
| R8 | 8k2 | 8.2k | ||
| R9 | 100k | 100k | ||
| R10 | 470k | 470k | ||
| R11 | 10k | 10k | ||
| R12 | 100 | 100 | ||
| R13 | 8k2 | 8.2k | ||
| R14 | 100k | 100k | ||
| R15 | 470k | 470k | ||
| R16 | 100 | 100 | ||
| R17 | 15k | 15k | ||
| R26 | 1M5 | 1.5M | ||
| R27 | 1k | 1k | ||
| R1 | 0.22ųF | 2.2e-07 | ||
| R19 | 0.0047ųF | 4.7e-09 | ||
| R18 | 0.01ųF | 1e-08 | ||
| Capacitors 9 | ||||
| C2 | 0.001ųF | 1n | ||
| C3 | 0.22ųF | 220n | ||
| C4 | 0.22ųF | 220n | ||
| C5 | 0.001ųF | 1n | ||
| C7 | 0.22ųF | 220n | ||
| C8 | 0.001ųF | 1n | ||
| C9 | 0.22ųF | 220n | ||
| C14 | 47ųF | 47u | ||
| C16 | 0.22ųF | 220n | ||
| Diodes 2 | ||||
| D1 | 1N4148 | 1N4148 | ||
| D2 | 1N4148 | 1N4148 | ||
| Transistors 2 | ||||
| Q1 | BC549C or 2N5089 | BC549C OR 2N5089 | ||
| Q2 | BC549C or 2N5089 | BC549C OR 2N5089 | ||
| Potentiometers 3 | ||||
| FUZZ | A100k | A100k | Potentiometer | |
| TONE | B100k | B100k | Potentiometer | |
| VOLUME | A100k | A100k | Potentiometer | |
| LEDs 1 | ||||
| D5 | LED | LED | ||