Enclosure not stated · 1 knobs
SBB
Based on the Alembic Stratoblaster Booster
- Category
- Boost· Boosters
- Controls
- Volume
- Price
- $7.00in stock
- Tags
- Bill of Materials
From the vendor
The RTS (ready-to-solder) PCB for Stratoblaster Booster Replica. This PCB is designed for use in a stompbox, but is still small enough to mount in a guitar cavity. The PCB dimensions are 4.0cm by 1.8cm. The PCB has plate through holes and lead-free solder tinning and it will accommodate a 16mm pcb-mount potentiometer - right angle or straight pin.
Click here for complete instructions for this PCB.
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 10 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 5 | ||||
| R1 | 100 | 100 | ||
| R2 | 22k | 22k | ||
| R3 | 12k | 12k | ||
| R5 | 100k | 100k | ||
| R11 | 1k | 1k | ||
| Capacitors 3 | ||||
| C1 | 10ųF | 10u | ||
| C2 | 1.5ųF | 1.5u | ||
| C3 | 100ųF | 100u | ||
| Transistors 1 | ||||
| Q1 | 2N5457 | 2N5457 | ||
| Potentiometers 1 | ||||
| VOLUME | C50k | C50k | Potentiometer | |