Tone Mender

From the vendor

Another winner from Run Off Groove. Clean boost with a 3-band tone stack to emulate classic Fender, Vox and Marshall responses. It's as simple as that. Use it to shape your base tone, or to kick in some punchy EQ'd boost. For a more indepth description head over to RunOffGroove. The kit is supplied with vertical-mount pots which have round shafts, so you'll need set-screw fitting knobs. Pot spacing is tight (17.5mm) so take that into account - small knobs required. If you want the PCB without parts there's a link for that at the bottom of the page. Partial kit: PCB, all board-mounted components, pots. Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED. Enclosure (pre-drilled) is available as an option with full kits, and will not take a battery. Knobs are not included. Builds are only available with full kits including enclosure and vertical-mount pots. Please choose appropriate knobs. Inspired by: Run Off Groove Tone Mender Difficulty: Medium PCB size: 50 x 33mm Knobs required: 4 Enclosure: 1590B Direct-Connect compatible (4-way) Download INSTRUCTION PDF