Spooky Mids Filter

From the vendor

This kit is for the newer Version 2 circuit Nice little mids filter box for tweaking your frequencies. Boost or cut your mids for slicing through a mix or scooped chugging. Lots of adjustments to be had by fiddling with the Mids and Sweep controls to find just the range you want to play with. The Hi/Lo switch alters the frequency peak for wider/softer or steep/sharp. The kit is supplied with vertical-mount pots which have round shafts, so you'll need set-screw fitting knobs. If you want the PCB without parts there's a link for that at the bottom of the page. Partial kit: PCB, all board-mounted components, pots. Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED. Enclosure (pre-drilled) is available as an option with full kits, and will not take a battery. Knobs are not included. Builds are only available with vertical-mount pots. Inspired by: Haunting Mids Difficulty: Medium PCB size: 50 x 34mm Knobs required: 3 Enclosure: 1590B Direct-Connect compatible (4-way) Download the INSTRUCTION PDF haunting mids