Enclosure not stated
Fuzz Dog· Spluff
Spluffer - Buffered signal splitter
Based on the AMZ Splitter Buffer· 1 other board clones it
- Category
- Utility· Other
- Difficulty
- Easy
- Price
- £15.60
- Tags
- other
From the vendor
Neat little circuit to split your guitar signal without any signal loss, based on the AMZ Splitter Buffer.
Split into 2, 3 or 4 outputs.
There are pads for both through-hole (expensive, scarce), or SMT (plentiful and mucho cheap), so go for the latter if you're confident with soldering tiny parts.
No enclosure option for this one - there are limitless possible configurations, so work it out however fits your setup.
See link below for a super neat, all board mounted version if two outputs is enough for you.
Kit includes: PCB, DC socket, board mounted components. You'll need to order the jacks separately. See link below.
Inspired by: AMZ Splitter Buffer
Difficulty: Easy
PCB size: 50 x 25mm
Download the INSTRUCTION PDF
Schematic
The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 23 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 12 | ||||
| R1 | 10M | 10M | ||
| R4 | 10K | 10k | ||
| R2 | 2M2 | 2.2M | ||
| R5 | 100K | 100k | ||
| R3 | 2M2 | 2.2M | ||
| R6 | 10K | 10k | ||
| R10 | 100R | 100 | ||
| R7 | 100K | 100k | ||
| R8 | 10K | 10k | ||
| R9 | 100K | 100k | ||
| R11 | 10K | 10k | ||
| R12 | 100K | 100k | ||
| Capacitors 6 | ||||
| C2 | 1u | 1u | ||
| C3 | 1u | 1u | ||
| C4 | 1u | 1u | ||
| C5 | 1u | 1u | ||
| C1 | 1u | 1u | ||
| C6 | 100u | 100u | elec | |
| Diodes 1 | ||||
| D1 | 1N5817 | 1N5817 | ||
| Transistors 4 | ||||
| Q1 | N-Channel | N-CHANNEL | ||
| Q2 | N-Channel | N-CHANNEL | ||
| Q3 | N-Channel | N-CHANNEL | ||
| Q4 | N-Channel | N-CHANNEL | ||
Other boards based on the AMZ Splitter Buffer
- Spluffer - Buffered signal splitter - Board Mounted Fuzz Dog · 1590A · £22.80