Enclosure not stated · 1 knobs
From the vendor
As you know, you should ALWAYS fire up your new circuit and test it before you wire up your switch and box it up. Amazingly many people don't. Now there's no excuse...
This simple circuit emulates your final jack, power and footswitch wiring, so you can easily test your nice new build without much work.
Simply connect your four offboard wires for IN, OUT, +V and GND to this tester and you're ready to plug in and play.
The tester has the option to connect individual wires or plug in a Direct Connect ribbon cable (4 or 6 way), so should cover you for all standard negative-ground builds. Not suitable for posi-ground circuits, sorry.
As everything is totally board-mounted on the tester there's very little to go wrong when building it.
Invaluable on any builder's bench.
Kit includes: PCB, all components, 3PDT footswitch, high quality jack sockets, DC socket, battery snap, LED.
Difficulty: Medium
PCB size: 50 x 50mm
Direct-Connect compatible (4- and 6-way)
Download the INSTRUCTION PDF
Schematic
The schematic is in the vendor's build document, page 4. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 1 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Potentiometers 1 | ||||
| TRS | one. If you do, the battery | ONE. IF YOU DO, THE BATTERY | ||