Signal Shooter

From the vendor

Nice crunch box based almost entirely on a Rat with a few tweaks.

External pot for 'Shape', i.e. the Ruez mod which is very popular on Rat builds. Asymetrical LED clipping gives it a harder edge than a standard Rat.

There's a toggle switch to engage a feedback loop from output back to input, which can be a lot of fun or complete waste of time depending on your outlook. We like that kind of thing around here.

This is based on the Mk I of the original pedal, which is entirely different to the later Mk II, so if you're looking for that one keep searching.

The kit is supplied with vertical-mount pots which have round shafts, so you'll need set-screw fitting knobs. You also have the option to replace the stock linear Gain pot with a reverse log, which gives much more control.

If you want the PCB without parts there's a link for that at the bottom of the page.

Partial kit: PCB, all board-mounted components, pots.

Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED.

Enclosure (pre-drilled) is available as an option with full kits, and will not take a battery. Knobs are not included.

Builds are only available with full kits including enclosures and vertical-mount pots. Please choose appropriate knobs.

Inspired by: Wave Cannon Mk I

Difficulty: Medium

PCB size: 50 x 40mm

Knobs required: 4

Enclosure: 1590B

Direct-Connect compatible (4-way)

Download the INSTRUCTION PDF